Ford Excursion Car Battery Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Ford Excursion Car Battery Replacement is $277 with $182 for parts and $95 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2002 Ford ExcursionV8-7.3L Turbo Diesel	Service typeCar Battery Replacement	Estimate$478.49	Shop/Dealer Price$579.37 - $859.49
2002 Ford ExcursionV10-6.8L	Service typeCar Battery Replacement	Estimate$458.49	Shop/Dealer Price$559.38 - $839.52
2005 Ford ExcursionV8-5.4L	Service typeCar Battery Replacement	Estimate$458.49	Shop/Dealer Price$559.38 - $839.52
2005 Ford ExcursionV10-6.8L	Service typeCar Battery Replacement	Estimate$458.49	Shop/Dealer Price$559.36 - $839.48
2002 Ford ExcursionV8-5.4L	Service typeCar Battery Replacement	Estimate$458.49	Shop/Dealer Price$559.40 - $839.55
2003 Ford ExcursionV8-6.0L Turbo Diesel	Service typeCar Battery Replacement	Estimate$458.49	Shop/Dealer Price$559.38 - $839.52
2001 Ford ExcursionV10-6.8L	Service typeCar Battery Replacement	Estimate$463.49	Shop/Dealer Price$564.25 - $844.28
2004 Ford ExcursionV8-5.4L	Service typeCar Battery Replacement	Estimate$463.49	Shop/Dealer Price$564.62 - $844.94

Show example Ford Excursion Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(74)

Rating Summary

69

4

0

0

1

69

4

0

0

1

SEE REVIEWS NEAR ME

Adam

16 years of experience

142 reviews

Adam

16 years of experience

by Mauricio Smith

Excursion 2001 - Car is not starting - Boca Raton, FL

Very knowledgeable and an expert at his craft.

Shawn

22 years of experience

62 reviews

Shawn

22 years of experience

by Michael Whitehurst

Excursion 2004 - Brake Caliper - Newport News, VA

Very good

Willie

21 years of experience

87 reviews

Willie

21 years of experience

by Tony Ross

Excursion 2000 - Alternator - Long Beach, CA

Mr. Hill was prompt, personable, knowledgeable AND Professional. He took his time to explain things in great detail. It was easy to see that he is a Professional in his craft. Overall experience was First-Class.

Chris

15 years of experience

2435 reviews

Chris

15 years of experience

by Guy Van Patten

Excursion 2005 - Glow Plugs - Huntington Beach, CA

Very dedicated to his customer, he works very hard to get everything just right he knows his business.

Excellent Rating

(74)

Rating Summary

69

4

0

0

1

69

4

0

0

1

SEE REVIEWS NEAR ME

Recent articles & questions

How Long Does a Speed Control Assembly Last?

Using Using the gas pedal allows you to speed up and control the car on the road, but it can be a chore when driving long distances on relatively flat roads with little to no other traffic. It can lead...

Rhode Island Speed Limits, Laws, and Fines

Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Rhode Island. Speed limits in Rhode Island 65 mph: some rural interstates and divided highways 50 mph divided...

B1200 OBD-II Trouble Code: Climate Control Pushbutton Circuit Failure

B1200 means there is an electrical failure in one or more of the climate control system's pushbuttons, likely caused to a damaged pushbutton.

Car turns on, able to shift but wont move

Great description. It sounds like you have a problem with the shifter cable (https://www.yourmechanic.com/services/shift-selector-cable-replacement). The cable either broke, or the end of it popped off. The cable runs from the shifter to a linkage arm on the transmission. The ends...

Car shakes and engine light blinking

Hi Luis. Thanks for contacting us today. What you are describing sounds quite a bit like a loose or damaged vacuum line. However, it's quite possible that you've got an ignition system problem that is causing an engine misfire to...

I have a Audi A4 2.0 a line quattro. Exhaust has white smoke coming out and it smells nasty.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com