Ford E-350 Club Wagon Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Ford E-350 Club Wagon Power Steering Pressure Hose Replacement is $183 with $60 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Ford E-350 Club WagonV8-6.0L Turbo DieselService typePower Steering Pressure Hose ReplacementEstimate$272.73Shop/Dealer Price$316.54 - $418.72
2003 Ford E-350 Club WagonV8-5.4LService typePower Steering Pressure Hose ReplacementEstimate$243.19Shop/Dealer Price$286.14 - $385.68
2003 Ford E-350 Club WagonV10-6.8LService typePower Steering Pressure Hose ReplacementEstimate$324.57Shop/Dealer Price$387.86 - $548.44
2005 Ford E-350 Club WagonV8-6.0L Turbo DieselService typePower Steering Pressure Hose ReplacementEstimate$246.73Shop/Dealer Price$290.53 - $392.71
2003 Ford E-350 Club WagonV8-7.3L Turbo DieselService typePower Steering Pressure Hose ReplacementEstimate$324.57Shop/Dealer Price$387.88 - $548.47
2005 Ford E-350 Club WagonV10-6.8LService typePower Steering Pressure Hose ReplacementEstimate$324.57Shop/Dealer Price$387.86 - $548.44
2005 Ford E-350 Club WagonV8-5.4LService typePower Steering Pressure Hose ReplacementEstimate$249.69Shop/Dealer Price$292.46 - $391.87
2004 Ford E-350 Club WagonV8-5.4LService typePower Steering Pressure Hose ReplacementEstimate$249.69Shop/Dealer Price$292.94 - $392.72
Show example Ford E-350 Club Wagon Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(10)

Rating Summary
8
1
1
0
0
8
1
1
0
0

David

28 years of experience
142 reviews
David
28 years of experience
Ford E-350 Club Wagon V8-5.4L - Spark Plug Replacement - San Diego, California
David came on time, and started working right away after a short check up of my van. He recommended an oil change and a few simple updates. David is a great and professional mechanic. It was very nice to communicate with him in Spanish, I'll definitely will recommend your clear services to my friends.

Chris

16 years of experience
324 reviews
Chris
16 years of experience
Ford E-350 Club Wagon V8-5.4L - Check Engine Light is on - San Diego, California
Chris came on time. He was unable to recharge our A/C because he proposed a set of preliminary tests for which he did not have the equipment to perform.

Peter

36 years of experience
346 reviews
Peter
36 years of experience
Ford E-350 Club Wagon V10-6.8L - Starter - San Diego, California
Peter was great on time actually early fix the job in no time and did an additional battery remote problem for free thank you so much

Dominic

25 years of experience
11 reviews
Dominic
25 years of experience
Ford E-350 Club Wagon V8-5.4L - Starter - Lockport, Illinois
Dominic came to the house even though it was raining hard. He knew our previous appointment was canceled due to rain. He said he would be there regardless and he came during a heavy rain. He started the work while it was raining and completed it. Luckily it stopped raining eventually. Dominic was very friendly and took the time to explain everything he was doing and what he found along the way. He made me feel at ease and certainly knew what he was doing. I would definitely have him come back for more work.

Excellent Rating

(10)

Rating Summary
8
1
1
0
0
8
1
1
0
0
Number of Ford E-350 Club Wagon services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

What Are Daytime Running Lights
Once Once upon a time, the average vehicle only had a handful of lights – headlights, taillights, brake lights, reverse lights and turn signals. Today, there are others, including fog lights and daytime running lights (DRL). Read on to find...
A Buyer’s Guide to the 2012 Mercedes-Benz M-Class
The The 2012 Mercedes-Benz M-Class is a mid-size luxury SUV that combines utility and comfort to make the perfect every day vehicle. It can handle almost any terrain with its all-wheel drive model. Drivers and passengers will experience a quiet...
Is it Safe to Drive With the TPMS Light On?
Low tire pressure activates the TPMS light, which can contribute to premature tire wear and tire failure.

Car losing water, but I don't see the leak.

Hi and thanks for the question - it is a good one. Modern cooling systems work under different pressures and with so many hoses and auxiliary water pumps it can be hard to find a coolant leak. Factor in that...

Prominent vibration throughout van when AC is on

Hello. The heat issue that you have with the van sounds like you have a blend door issue under the dash. As for the vibration I usually check to see if the idle is getting too low when the AC...

My break petal and steering wheel is super hard and won’t allow my engine to turn on. Also, check engine is on, it says oil change due and a red light bulb is on.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com