Ford Bronco Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(124)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(124)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Ford Bronco Hazard / Turn Signal Flasher Replacement is $144 with $49 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1988 Ford BroncoV8-5.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$243.69Shop/Dealer Price$285.87 - $389.89
1980 Ford BroncoL6-4.9LService typeHazard / Turn Signal Flasher ReplacementEstimate$223.69Shop/Dealer Price$265.88 - $369.92
1992 Ford BroncoL6-4.9LService typeHazard / Turn Signal Flasher ReplacementEstimate$223.69Shop/Dealer Price$265.88 - $369.92
1966 Ford BroncoV8-4.7LService typeHazard / Turn Signal Flasher ReplacementEstimate$317.63Shop/Dealer Price$383.29 - $557.76
1976 Ford BroncoV8-5.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$223.69Shop/Dealer Price$265.90 - $369.95
1966 Ford BroncoL6-2.8LService typeHazard / Turn Signal Flasher ReplacementEstimate$223.69Shop/Dealer Price$265.88 - $369.92
1968 Ford BroncoL6-2.8LService typeHazard / Turn Signal Flasher ReplacementEstimate$228.69Shop/Dealer Price$270.75 - $374.68
1991 Ford BroncoV8-5.8LService typeHazard / Turn Signal Flasher ReplacementEstimate$198.95Shop/Dealer Price$233.94 - $315.86
Show example Ford Bronco Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(124)

Rating Summary
110
5
1
3
5
110
5
1
3
5

Manuel

32 years of experience
579 reviews
Manuel
32 years of experience
Ford Bronco V8-5.8L - Car is not starting - Trabuco Canyon, California
Manuel was excelllent! Would absolutely use him again!

Patrick

33 years of experience
1412 reviews
Patrick
33 years of experience
Ford Bronco V8-5.8L - Car is not starting - San Marcos, Texas
Great service! On time, explained exactly what was needed and very helpful in answering my questions.

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Ford Bronco V8-5.0L - Oil Change - Jacksonville, Florida
Fantastic great guy. Looking forward to booking him again every time

Matthew

11 years of experience
136 reviews
Matthew
11 years of experience
Ford Bronco V8-5.8L - Car is not starting - Las Vegas, Nevada
I was satisfied with the job he did.

Excellent Rating

(124)

Rating Summary
110
5
1
3
5
110
5
1
3
5
Number of Ford Bronco services completed
1364+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

What Is the Difference Between Conventional, Electronic and Distributor-less Ignition Systems?
If If you’re like many people, you know that when you turn the key in your ignition, the engine cranks and you’re able to drive your car. However, you might not know how that ignition system works. For that matter,...
P0497 OBD-II Trouble Code: Evaporative Control System Malfunction
P0497 P0497 OBD-II Trouble Code: Evaporative Control System Malfunction Diagnostic Trouble Code (DTC): P0497 P0497 code definition The P0497 code, or Evaporative Emission System Low Purge Flow, is indicative of a problem somewhere in the EVAP control system. What the...
P0925 OBD-II Trouble Code: Gear Shift Reverse Actuator Circuit Range/Performance
P0925 means there was an abnormal voltage reading from the gear shift reverse actuator circuit due to faulty reverse gear guide rail or shift shaft.

What is the break-in period?

Like all other cars on the market, the Ford Fusion requires a break-in period when purchased new. This is a relatively short period during which you need to drive under certain conditions and avoid some types of behavior in order...

P1810 Pressure Manifold Fault

If you have code P1810, then this might be something wrong with the transmission control valve for the gear position sensor, or a compatibility problem between the different computers. Have a pinpoint test for the code (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) done and see...

Remote start stopped working and check engine light went on.

Hi there. The codes are referring that that both banks on the engine are reading a lean condition. For a lean condition to occur, the fuel system is not functioning properly. Check the fuel pump, fuel pump relay, and the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com