Ford Aspire Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Ford Aspire Car Thermostat Replacement is $163 with $68 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Ford AspireL4-1.3LService typeCar Thermostat ReplacementEstimate$251.65Shop/Dealer Price$295.82 - $405.81
1995 Ford AspireL4-1.3LService typeCar Thermostat ReplacementEstimate$231.65Shop/Dealer Price$275.83 - $385.84
1996 Ford AspireL4-1.3LService typeCar Thermostat ReplacementEstimate$231.65Shop/Dealer Price$275.83 - $385.84
1994 Ford AspireL4-1.3LService typeCar Thermostat ReplacementEstimate$231.65Shop/Dealer Price$275.81 - $385.80
Show example Ford Aspire Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Noe

36 years of experience
604 reviews
Noe
36 years of experience
Ford Aspire L4-1.3L - Other Inspections - Federal Way, Washington
Noe did an excellent job! He was quick and explained the problem in detail. The problem was very minor and did not require any replacement parts, so he had helped me save even more! He did an overall inspection of my vehicle as well, and let me know my car is in great shape. It makes me feel safe driving my vehicle! I highly recommend Noe's services!

Trung

12 years of experience
412 reviews
Trung
12 years of experience
Ford Aspire L4-1.3L - Valve Cover Gasket - Union City, California
Trung was on time... and did great work within the expected timeframe. Explained and showed what he did during the repairs! Excellent customer service! Job well done! Thanks Trung!

Matthew

33 years of experience
1210 reviews
Matthew
33 years of experience
Ford Aspire L4-1.3L - Car is overheating - Williamsburg, Virginia
diagnosed my car for me

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Ford Aspire L4-1.3L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Jacksonville, Florida
Joel is great- He showed up on time and completed the repair in exactly the time I had asked him how long he thought it would take. The cars running great again. I recommend Joel.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Ford Aspire services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

When Does the Gas Light Turn On in My Car?
Going Going to the gas station is a chore and many of us wait until the gas light is on and the tank is nearly empty. But waiting until your fuel tank dries up is a bad habit, and the...
Symptoms of a Bad or Failing ABS Control Module
Common signs include an unresponsive brake pedal, the ABS Light coming on, and brakes locking up.
Symptoms of Bad or Failing Spring Insulators
Common signs include the vehicle bottoming out, excessive road noise, grinding noises while turning, and damage to front tires and brakes.

Instruments, interior lights, radio, and power windows not working.

I would test all your fuses and make sure they are all good. There should be one for the instrument cluster and interior lights. Have a mechanic from YourMechanic do it if you are unsure how.

alarm won't cut off, even when I unhook the battery an re hook it it will come back on

Depending on the alarm system you have, it will vary the type of repair that will be needed to diagnose or fix the problem. If you have the factory alarm system, then you will have to have the system diagnosed...

I have an 07 Yukon Denali xl 6.2l. My truck temp is running around 230 to 240 degrees. If I get on the highway it will at 210 degrees. Its been running like this for a few days now. I also noticed the rear heat takes longer to get warm or doesn't get warm at all. Today I noticed that the driver heat is going from hot to cool. My [ac compressor](/topics-ac-compressor-gmc/) needs replacement but its getting cold out now so thats not a necessity. I replaced the [water pump](/topics-water-pump-gmc/) maybe last summer. What could be the issue

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com