Dodge W150 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(75)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(75)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Dodge W150 Control Arm Assembly Replacement is $162 with $67 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1988 Dodge W150V8-5.2LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$444.61Shop/Dealer Price$505.15 - $626.01
1980 Dodge W150L6-3.7LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$737.63Shop/Dealer Price$908.31 - $1397.80
1990 Dodge W150V6-3.9LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$390.61Shop/Dealer Price$451.20 - $572.09
1982 Dodge W150L6-3.7LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$661.93Shop/Dealer Price$813.66 - $1246.36
1989 Dodge W150V8-5.2LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$390.61Shop/Dealer Price$451.24 - $572.16
1985 Dodge W150V8-5.9LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$229.13Shop/Dealer Price$272.68 - $380.80
1987 Dodge W150V8-5.2LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$234.13Shop/Dealer Price$277.55 - $385.56
1978 Dodge W150V8-5.9LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$578.73Shop/Dealer Price$708.67 - $1075.42
Show example Dodge W150 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(75)

Rating Summary
67
7
0
0
1
67
7
0
0
1

Peter

13 years of experience
3 reviews
Peter
13 years of experience
Dodge W150 V8-5.2L - Car is hesitating and bucking Inspection - Richmond, Virginia
It was overall a great experience

Andrew

11 years of experience
841 reviews
Andrew
11 years of experience
Dodge Charger V8-5.7L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Olathe, Kansas
Andrew did a great job. Everything went smoothly.

Lucas

21 years of experience
885 reviews
Lucas
21 years of experience
Dodge Charger V6-2.7L - Control Arm Assembly Replacement (Front Lower Left) - Glendale, California
Lucas is the man, he diagnosed the problem first the came back "on time" and Fixed it I highly recommend Lucas to anybody that is looking for an A Plus Mechanic.

Matthew

33 years of experience
1210 reviews
Matthew
33 years of experience
Dodge Stratus V6-2.7L - Control Arm Assembly Replacement (Rear Upper Right) - Norfolk, Virginia
Got some work done on my car after the diagnostic. It was estimated that the repair would take 3 hours, and it only took Matt 1 hour! He knew of a faster method of fixing my car, and I have not had any problems since. He gives detailed explanations of what he was doing and why. He welcomes questions and encourages people to ask him for advice whenever. Great guy to have a conversation with as well.

Excellent Rating

(75)

Rating Summary
67
7
0
0
1
67
7
0
0
1
Number of Dodge Control Arm Assembly Replacement services completed
825+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Porsche 911
The The prestige offered by the 2012 Porsche 911 can’t be ignored thanks to its iconic appeal. While in its sixth and seventh generation models for the series, this sports car is still one that commands attention and appreciation from...
How to Buy Good Quality Sensors
Sensors Sensors for autos have many of the same characteristics that other types of sensors do – they are created to detect a signal, respond to chemical or physical variations such as distance or temperature. These signals are then converted...
The Worst Cities to Break Down In
Here's where you'll find the highest car repair costs, worst public transportation, and congestion.

Question about driver side break

The information and description is a bit limited but I can do my best to assist you. I'm not quite sure I know what you mean when you say one caliper looks longer than the rest? The front brakes are...

Brake lights and third brake lights not working

When you turn on the head lights you are seeing the parking lights come on. Check to make sure your brake light fuse (https://www.yourmechanic.com/services/fuse-replacement) is good. If it's good, check for power going in and out of brake light when...

Clutch will not move and the car is stuck

Hi there. There are a couple of possibilities for your clutch issue - the throwout bearing may have worn enough to lock with the pressure plate, the clutch pedal and rod to the clutch master cylinder may be misadjusted so...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com