Dodge W100 Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(110)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(110)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Dodge W100 Valve Cover Gasket Replacement is $144 with $49 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1986 Dodge W100L6-3.7LService typeValve Cover Gasket ReplacementEstimate$235.57Shop/Dealer Price$271.96 - $354.15
1989 Dodge W100V8-5.2LService typeValve Cover Gasket ReplacementEstimate$298.69Shop/Dealer Price$355.51 - $496.68
1987 Dodge W100L6-3.7LService typeValve Cover Gasket ReplacementEstimate$211.57Shop/Dealer Price$247.98 - $330.18
1984 Dodge W100V8-5.9LService typeValve Cover Gasket ReplacementEstimate$379.27Shop/Dealer Price$460.34 - $681.04
1988 Dodge W100V8-5.9LService typeValve Cover Gasket ReplacementEstimate$407.77Shop/Dealer Price$491.88 - $714.87
1986 Dodge W100V8-5.9LService typeValve Cover Gasket ReplacementEstimate$407.77Shop/Dealer Price$491.86 - $714.84
1984 Dodge W100V8-5.2LService typeValve Cover Gasket ReplacementEstimate$275.19Shop/Dealer Price$328.87 - $467.68
1988 Dodge W100V8-5.2LService typeValve Cover Gasket ReplacementEstimate$305.19Shop/Dealer Price$362.32 - $503.72
Show example Dodge W100 Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(110)

Rating Summary
105
3
2
0
0
105
3
2
0
0

Andrew

11 years of experience
841 reviews
Andrew
11 years of experience
Dodge Caravan V6-3.3L - Valve Cover Gasket - Kansas City, Missouri
Good

Keith

18 years of experience
370 reviews
Keith
18 years of experience
Dodge Grand Caravan V6-3.8L - Valve Cover Gasket - Davenport, Florida
Very knowledgeable and dedicated to his work. Would recommend him to people.

Alonzo

27 years of experience
41 reviews
Alonzo
27 years of experience
Dodge Dakota V6-3.9L - Valve Cover Gasket - Posen, Illinois
Polite, on time and very informative about vehicle maintenence.

Patrick

33 years of experience
1408 reviews
Patrick
33 years of experience
Dodge Charger V8-5.7L - Valve Cover Gasket Replacement - Pflugerville, Texas
Great mechanic. Very pleasant to work with and very knowledgeable.

Excellent Rating

(110)

Rating Summary
105
3
2
0
0
105
3
2
0
0
Number of Dodge Valve Cover Gasket Replacement services completed
1210+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

P0400 OBD-II Trouble Code: Exhaust Gas Recirculation Flow Malfunction
P0400 code definition Exhaust Gas Recirculation Flow Malfunction What the P0400 code means P0400 is an OBD-II generic code that the engine...
B1888 OBD-II Trouble Code: Air Bag Passenger Circuit Resistance Low or Shorted Together
B1888 means there is a malfunction in the passenger airbag circuit, likely due to a short circuit or defective clockspring.
P1100 OBD-II Trouble Code: Mass Airflow Sensor Intermittent
P1100 means there is an issue with the mass airflow sensor, likely due to it being dirty, broken, leaking, or shorted.

Does the OBD system use more than lights to communicate with the driver?

Malfunction Indicator Lamps (MIL) and audible alarms are currently the only means by which the On-Board Diagnostics (OBD) system can inform the driver of any issues that adversely affect the operation of the engine or other electronically controlled system. The...

Oil consumption

In order to find out if an engine is consuming excessive oil through the normal combustion process you will need to have a fresh oil change done. The vehicle engine checked and any oil leaks repaired and vehicle driven for...

Check engine light

There are literally hundreds, if not thousands, of possible causes for the check engine light to come on (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection). The only real way to know what has caused the light to come on is to pull the diagnostic trouble codes...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com