Dodge Monaco Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(692)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(692)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Dodge Monaco Brake Pad Replacement is $207 with $67 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Dodge MonacoV6-3.0LService typeBrake Pads - Front ReplacementEstimate$358.72Shop/Dealer Price$406.22 - $539.00
1991 Dodge MonacoV6-3.0LService typeBrake Pads - Rear ReplacementEstimate$347.91Shop/Dealer Price$393.29 - $524.48
1990 Dodge MonacoV6-3.0LService typeBrake Pads - Rear ReplacementEstimate$347.91Shop/Dealer Price$393.32 - $524.53
1992 Dodge MonacoV6-3.0LService typeBrake Pads - Rear ReplacementEstimate$347.91Shop/Dealer Price$393.32 - $524.53
1991 Dodge MonacoV6-3.0LService typeBrake Pads - Front ReplacementEstimate$347.91Shop/Dealer Price$395.09 - $527.62
1990 Dodge MonacoV6-3.0LService typeBrake Pads - Front ReplacementEstimate$347.91Shop/Dealer Price$393.49 - $524.82
Show example Dodge Monaco Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(692)

Rating Summary
661
21
3
1
6
661
21
3
1
6

Chris

21 years of experience
448 reviews
Chris
21 years of experience
Dodge Monaco V8-5.2L - Car is not starting - Hillsboro, Oregon
Came well on time, was very transparent with how the appointment would go, and managed to figure out things I wasn't much help on (like where the hood release is). He made sure I had the information I needed before he left, and went above and beyond with making sure we'd have the right part to replace since I have a 1977 vehicle. I highly recommend Chris.

Wayne

32 years of experience
102 reviews
Wayne
32 years of experience
Dodge Grand Caravan V6-3.3L - Brake Pads Replacement (Front) - Philadelphia, Pennsylvania
Pleasant prompt

Brandon

21 years of experience
773 reviews
Brandon
21 years of experience
Dodge Grand Caravan V6-3.6L - Brake Pads Replacement (Front, Rear) - Ocoee, Florida
Brandon was kind, speedy, and efficient. We will use him in the future!

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Dodge Ram 2500 L6-5.9L Turbo Diesel - Brake Pads Replacement (Front) - Newport News, Virginia
Matthew was fantastic! Could not have asked for a better mechanic. I will not use anyone else for repairs again.

Excellent Rating

(692)

Rating Summary
661
21
3
1
6
661
21
3
1
6
Number of Dodge Brake Pad Replacement services completed
7612+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

P0760 OBD-II Trouble Code: Shift Solenoid C Malfunction
P0670 code means there has been an irregularity detected within shift solenoid C often due too hydraulic blockages or low transmission fluid.
The Guide to Colored Curb Zones in California
Drivers Drivers in California will notice that there are many different painted colored curbs, and some drivers may still be confused as to what each of these different colors means. Let’s look at the various colors so you can learn...
P2757 OBD-II Trouble Code: Torque Converter Clutch Press Control Solenoid Control Circuit Performance or Stuck Off
P2757 means a problem with the torque converter clutch pressure control solenoid due to a bad torque converter or solenoid or electrical issues.

Car vibrating in park and reverse

On the Honda Civics the passenger side motor mounts are known to fail and can cause the issues of vibration that you are experiencing. These mounts are fluid filled, and often when they fail, you will notice a small amount...

I just used semi synthetic oil instead of full synthetic in my 1996 lincoln town car executive

Hi there. If you asked this question about 10 years ago - then yes, you might have issues with seals or gaskets wearing prematurely. However, as technology has improved, the gap between semi-synthetic and full synthetic is not as big....

where is crankshaft sensor located on a 2000 protege

The crankshaft sensor is on the front of engine below and behind the crankshaft pulley. The air gap on the new sensor should be set to .020 to .060. If gap is too big it will not start and if...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com