Dodge D200 Series Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(110)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(110)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Dodge D200 Series Valve Cover Gasket Replacement is $163 with $49 for parts and $114 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1961 Dodge D200 SeriesL6-3.7LService typeValve Cover Gasket ReplacementEstimate$235.57Shop/Dealer Price$271.96 - $354.15
1967 Dodge D200 SeriesL6-3.7LService typeValve Cover Gasket ReplacementEstimate$211.57Shop/Dealer Price$247.99 - $330.19
1961 Dodge D200 SeriesV8-5.2LService typeValve Cover Gasket ReplacementEstimate$289.19Shop/Dealer Price$345.01 - $485.42
1962 Dodge D200 SeriesV8-5.2LService typeValve Cover Gasket ReplacementEstimate$289.19Shop/Dealer Price$344.98 - $485.38
1963 Dodge D200 SeriesL6-3.7LService typeValve Cover Gasket ReplacementEstimate$211.57Shop/Dealer Price$248.00 - $330.22
1961 Dodge D200 SeriesV8-5.1LService typeValve Cover Gasket ReplacementEstimate$289.19Shop/Dealer Price$345.01 - $485.42
1967 Dodge D200 SeriesV8-6.3LService typeValve Cover Gasket ReplacementEstimate$295.19Shop/Dealer Price$350.85 - $491.14
1965 Dodge D200 SeriesL6-3.7LService typeValve Cover Gasket ReplacementEstimate$217.57Shop/Dealer Price$254.27 - $336.68
Show example Dodge D200 Series Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(110)

Rating Summary
105
3
2
0
0
105
3
2
0
0

Jerome

24 years of experience
415 reviews
Jerome
24 years of experience
Dodge Ram 1500 V6-3.9L - Valve Cover Gasket Replacement - Baltimore, Maryland
This is the second time that Jerome has services this vehicle and again he was very professional. I truly appreciate the work he does. Thanks again Jerome.

Chuy

14 years of experience
398 reviews
Chuy
14 years of experience
Dodge Charger V8-5.7L - Valve Cover Gasket - Riverside, Illinois
Very knowledgeable man.

Kenneth

11 years of experience
104 reviews
Kenneth
11 years of experience
Dodge Grand Caravan V6-3.8L - Valve Cover Gasket - Atlanta, Georgia
Great Service

Robert

16 years of experience
81 reviews
Robert
16 years of experience
Dodge Grand Caravan V6-3.8L - Valve Cover Gasket - Phoenix, Arizona
Thanks Robert.

Excellent Rating

(110)

Rating Summary
105
3
2
0
0
105
3
2
0
0
Number of Dodge Valve Cover Gasket Replacement services completed
1210+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Get a South Dakota Driver's Permit
The The state of South Dakota requires all new drivers under 18 years old to begin driving with an instruction permit, in order to practice safe driving under supervision before getting their full driver’s license. To receive the initial learner’s...
P2433 OBD-II Trouble Code: Secondary Air Injection System Air Flow/Pressure Sensor Circuit High Bank 1
Diagnostic Diagnostic Trouble Code (DTC): P2433 P2433 code definition Secondary Air Injection System Air Flow/Pressure Sensor Circuit High Bank 1 Related Trouble Codes: P2430: Sec Air Inj Sys Airflow/Press Sensor Circ Bank 1 P2431: Sec Air Inj Sys Airflow/Press Sensor...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Washington
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Washington through the Universal Technical Institute.

when i accelerate the stationary car in first gear then car vibrates.

Hello. Most of the time this is a drive shaft issue. I would check the coupling joints to see if they are worn out. Most of the time they will be and they will need to be replaced. I have...

Check engine light on after storage.

Autozone cannot hook a code reader to any vehicle manufactured before 1996 generally because these are not OBD-II equipped vehicles. An experienced technician like one from YourMechanic however is capable of pulling the check engine light fault codes fro the...

The oil pressure light is blinking.

Hi There, This light will usually come on when one of two things are happening. Either the motor is in fact low on oil or the oil pressure sending unit (https://www.yourmechanic.com/services/oil-pressure-sensor-replacement) is not working properly and may be producing a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com