Chrysler PT Cruiser Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(16)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Chrysler PT Cruiser Car Thermostat Replacement is $289 with $93 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Chrysler PT CruiserL4-2.4LService typeCar Thermostat ReplacementEstimate$402.92Shop/Dealer Price$454.44 - $597.66
2004 Chrysler PT CruiserL4-2.4LService typeCar Thermostat ReplacementEstimate$390.31Shop/Dealer Price$439.35 - $580.72
2010 Chrysler PT CruiserL4-2.4LService typeCar Thermostat ReplacementEstimate$390.31Shop/Dealer Price$439.39 - $580.78
2009 Chrysler PT CruiserL4-2.4LService typeCar Thermostat ReplacementEstimate$390.31Shop/Dealer Price$439.39 - $580.78
2005 Chrysler PT CruiserL4-2.4L TurboService typeCar Thermostat ReplacementEstimate$390.31Shop/Dealer Price$441.45 - $584.39
2009 Chrysler PT CruiserL4-2.4L TurboService typeCar Thermostat ReplacementEstimate$390.31Shop/Dealer Price$439.58 - $581.12
2006 Chrysler PT CruiserL4-2.4LService typeCar Thermostat ReplacementEstimate$390.31Shop/Dealer Price$439.41 - $580.82
2003 Chrysler PT CruiserL4-2.4LService typeCar Thermostat ReplacementEstimate$390.31Shop/Dealer Price$439.39 - $580.78
Show example Chrysler PT Cruiser Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0
Number of Chrysler PT Cruiser Car Thermostat Replacement services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Avoid Back Pain in a Car
If If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from sitting in a car’s seat for a long drive. Sometimes,...
How to Drive an Air Bag Equipped Vehicle
If If you drive a 1998 or newer vehicle, it is almost sure to have dual front air bags. Air bags are a safety feature that protect vehicle occupants from injury, or reduce the extent of injuries experienced in a...
P0404 OBD-II Trouble Code: Exhaust Gas Recirculation Circuit Range/Performance
P0404 code definition Exhaust Gas Recirculation Circuit Range/Performance What the P0404 code means P0404 is an OBD-II generic code that the engine...

How do you reset computer for check engine light

In order to get the reset the ECM and get the check engine light to turn off I would recommend having a check engine light inspection (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) having a mechanic like one from YourMechanic come to you and scan the...

2012 Chevy Camaro SS -MAF sensor replaced per OEM code; however, engine still idling rough Knocking from passenger side increases

A blocked oil passage can cause high oil pressure and of course lack of oil flow can cause engine noise. However, it is not clear from your inquiry if your oil pressure is really out of spec high. OBD-II codes...

The rear tire is leaning inward at the top on my 2000 Alaro Oldsmobile

It could be that you have damage to the rear strut, or maybe that the bolts that attach the lower part of the strut have loosened up and allowed the adjustment to slip. This might be a dangerous situation, so...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com