Chrysler Imperial Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,648)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,648)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a Chrysler Imperial Brake Vacuum Pump Replacement is $467 with $327 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Chrysler ImperialV6-3.8LService typeBrake Vacuum Pump ReplacementEstimate$949.86Shop/Dealer Price$1152.18 - $1751.02
1990 Chrysler ImperialV6-3.3LService typeBrake Vacuum Pump ReplacementEstimate$847.11Shop/Dealer Price$1024.22 - $1551.44
1993 Chrysler ImperialV6-3.8LService typeBrake Vacuum Pump ReplacementEstimate$940.85Shop/Dealer Price$1141.42 - $1738.96
1991 Chrysler ImperialV6-3.8LService typeBrake Vacuum Pump ReplacementEstimate$940.85Shop/Dealer Price$1141.42 - $1738.96
1991 Chrysler ImperialV6-3.3LService typeBrake Vacuum Pump ReplacementEstimate$847.11Shop/Dealer Price$1025.72 - $1554.06
Show example Chrysler Imperial Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(5,648)

Rating Summary
5,242
209
41
36
120
5,242
209
41
36
120

Keith

27 years of experience
231 reviews
Keith
27 years of experience
Chrysler Sebring V6-3.5L - Car is not starting - Euless, Texas
He is a great and wonderful guy. His services is highly recommended. Came and got the job done. Thank you so much Keith. U had made my day a whole lot better. Will recommend to everyone!

Travis

14 years of experience
691 reviews
Travis
14 years of experience
Chrysler 300 V6-3.6L - Brake System Flush - Saint Paul, Minnesota
Very knowledgeable with cars

Dameron

18 years of experience
273 reviews
Dameron
18 years of experience
Chrysler Town & Country V6-3.6L - Tire Rotation - Indianapolis, Indiana
He’s very knowledgeable, friendly, and quick.

Bryant

13 years of experience
638 reviews
Bryant
13 years of experience
Chrysler 200 L4-2.4L - Battery - Indianapolis, Indiana
Bryant did a great job! He’s a lifesaver!

Excellent Rating

(5,648)

Rating Summary
5,242
209
41
36
120
5,242
209
41
36
120
Number of Chrysler services completed
62128+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

What are the Types of Brake Fluid?
Dot 3, Dot 4, and Dot 5.1 brake fluids are most common in modern vehicles. They differ in wet and dry boiling points.
Child Seat Safety Laws in Maine
The The State of Maine mandates very strict requirements for the transportation of children in motor vehicles. These are simply common-sense procedures that have been codified in order to protect children. They are etched in the law simply because people...
Insurance Requirements for Car Registration in Louisiana
The The Louisiana Department of Insurance requires that all drivers in Louisiana carry liability automotive insurance, or “financial responsibility,” in order to operate a vehicle legally and maintain vehicle registration. The minimum financial responsibility requirements for Louisiana drivers are as...

Master cylinder and brake booster leaking

Worn master cylinder seals can cause brake fluid to leak into the brake booster, damaging it. I'm guessing this is what happened to your truck. Replacing both the master cylinder (https://www.yourmechanic.com/services/brake-master-cylinder-replacement) and brake booster (https://www.yourmechanic.com/services/power-brake-booster-replacement) is the only way to...

I have a 2013 BMW M5 41.5kmi on it: is it necessary to replace rotors when replacing brake pads?

Thanks for writing in about your BMW M5. The rotors should be checked to be correct thickness. They should only be replaced if they're damaged or below the minimum thickness. If you're unsure if you're rotors need to be replaced,...

When parking lights activate, left turn signal independently stays on

Hello there, thank you for asking about your car. If the turn signal stays solid on the dash instead of blinking, that typically indicates a failed bulb. If the bulb is not the issue, check the connector at the turn...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com