Chrysler 200 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(23)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(23)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Chrysler 200 Car Thermostat Replacement is $235 with $95 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Chrysler 200L4-2.4LService typeCar Thermostat ReplacementEstimate$360.88Shop/Dealer Price$412.44 - $558.19
2017 Chrysler 200L4-2.4LService typeCar Thermostat ReplacementEstimate$738.55Shop/Dealer Price$819.20 - $1048.76
2011 Chrysler 200L4-2.4LService typeCar Thermostat ReplacementEstimate$350.97Shop/Dealer Price$400.61 - $544.93
2014 Chrysler 200V6-3.6LService typeCar Thermostat ReplacementEstimate$349.09Shop/Dealer Price$401.72 - $555.44
2013 Chrysler 200V6-3.6LService typeCar Thermostat ReplacementEstimate$349.09Shop/Dealer Price$403.20 - $558.02
2012 Chrysler 200V6-3.6LService typeCar Thermostat ReplacementEstimate$349.09Shop/Dealer Price$401.86 - $555.69
2017 Chrysler 200V6-3.6LService typeCar Thermostat ReplacementEstimate$447.39Shop/Dealer Price$524.61 - $752.07
2016 Chrysler 200L4-2.4LService typeCar Thermostat ReplacementEstimate$738.55Shop/Dealer Price$819.27 - $1048.88
Show example Chrysler 200 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(23)

Rating Summary
23
0
0
0
0
23
0
0
0
0

Greg

21 years of experience
112 reviews
Greg
21 years of experience
200 2015 - Thermostat - Queen Creek, AZ
Greg is very professional and knowledgeable. He explains what he is going to do and answers any questions that you have. I would like Greg to work on any car issues I have in the future. Thanks Greg. Jerry

Mike

25 years of experience
79 reviews
Mike
25 years of experience
200 2012 - Window Motor - Canton, MI
Great guy excellent service

Alexander

5 years of experience
126 reviews
Alexander
5 years of experience
200 2012 - Axle / CV Shaft Assembly - Columbus, OH
Just great Alexander was wonderful. Pleasant and really cared about meeting your needs. In my book he exceeded my expectations.

Jay

30 years of experience
1009 reviews
Jay
30 years of experience
200 2011 - Water Pump - San Jacinto, CA
Jay is a great worker and I would recommend him to everyone he gets to it and let's you know what the problems is of you dont know. He doesn't mess around he lets you know straight facts and that is something we need these days money well spent.

Excellent Rating

(23)

Rating Summary
23
0
0
0
0
23
0
0
0
0
Number of Chrysler 200 Car Thermostat Replacement services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

P0026 OBD-II Trouble Code: Intake Valve Control Solenoid Circuit Range/Performance (Bank 1)
P0026 P0026 trouble code definition Intake Valve Control Solenoid Circuit Range/Performance (Bank 1) What the P0026 code means P0026 is the OBD-II generic code indicating the engine control module (ECM) has determined that the variable valve lift solenoid for the...
P0171 OBD-II Trouble Code: System Too Lean (Bank 1)
P0171 code definition System Too Lean (Bank 1) What the P0171 code means The P0171 OBD-II code means that, on the first...
How to Register a Car in Wisconsin
Driving Driving a car is something that most people take for granted. When moving to a new state, like Wisconsin, you will need to check to make sure you are complying with all of their laws. Having your car registered...

Changing control arm bushings on a 2009 Subaru WRX

Things can change but you'll need to replace it and that is a real pain. On that vehicle, they are very popular. So, you can go to any good aftermarket parts place and get an aftermarket control arm (https://www.yourmechanic.com/parts/control-arm-assembly) with...

Cylinder 2 Misfire, and water contamination in the fuel.

Hello. If your fuel was recently contaminated with water then that is likely the reason behind the cylinder 2 misfire. As the fuel travels to all of the cylinders, this leaves them all susceptible to misfires, as well as the...

I have a f150 the advance track service light has started coming on at times it does not want to crank and tonight it shut off twi

The advancetrac light will come on when the engine has an issue or problem and you will need to have the check engine light scanned to get the stored codes and have those codes tested to find the reason for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com