Chevrolet Trailblazer Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(570)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(570)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Chevrolet Trailblazer Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Chevrolet TrailblazerL3-1.3L TurboService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2009 Chevrolet TrailblazerV8-5.3LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 Chevrolet TrailblazerL3-1.2L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 Chevrolet TrailblazerL6-4.2LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2006 Chevrolet TrailblazerV8-5.3LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2021 Chevrolet TrailblazerL3-1.3L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2003 Chevrolet TrailblazerL6-4.2LService typeTransfer case fluid is dirty InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2007 Chevrolet TrailblazerV8-5.3LService typeTransfer case fluid is dirty InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Trailblazer Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(570)

Rating Summary
538
18
3
5
6
538
18
3
5
6

Attila

19 years of experience
910 reviews
Attila
19 years of experience
Chevrolet Trailblazer L6-4.2L - Check Engine Light is on - Linden, New Jersey
Stopped me from wasting money on something I read on the internet about emissions.

Attila

19 years of experience
910 reviews
Attila
19 years of experience
Chevrolet Trailblazer L6-4.2L - Check Engine Light is on - Linden, New Jersey
This is one of the best ways to help people (especially females) like myself to not get ripped off because of lack of knowledge. I feel very comfortable and relieved about my vehicle now. About time! This type of service is a God send. I truly thankyou. Will be using this from now on. Definitely will spread the word.

Kenneth

20 years of experience
777 reviews
Kenneth
20 years of experience
Chevrolet Trailblazer L6-4.2L - Car is not starting - Bell, California
Professional, courteous and knowledgeable. Straight forward with result with expert opinion moving forward with diagnostic information.

James

30 years of experience
877 reviews
James
30 years of experience
Chevrolet Trailblazer L6-4.2L - Ball Joint Front Replacement (Upper Left) - Kissimmee, Florida
James was fantastic working on my truck. Very professional and nice guy.

Excellent Rating

(570)

Rating Summary
538
18
3
5
6
538
18
3
5
6
Number of Chevrolet Trailblazer services completed
6270+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Host a Tailgate Party like a Pro
To host an awesome tailgate party you'll need great BBQ recipes, an ice cold cooler, a playlist of party music, and friends to help celebrate.
P0583 OBD-II Trouble Code: Cruise Control Vacuum Control Circuit Low
P0583 means the cruise control is unable to properly maintain cruising speed due to a cracked or broken vacuum supply hose, or faulty wiring.
How to Troubleshoot a Parking Brake or Emergency Brake That Won't Hold the Car
Emergency brakes won't hold a car if the parking brake level is stuck, the parking brake cable is stretched, or the brake shoes or pads are worn out.

Vehicle won't start when warmed up - 1992 Chevrolet Caverlier

Hello. A bad ignition coil (https://www.yourmechanic.com/services/ignition-coil-replacement) is often times the culprit of a no start/no spark issue when the engine is warm. Since you just replaced this, this should not be the problem. I would suggest checking the crank position...

It’s been running lean and has recently hesitated to start back up again after driving it. It also begins to overheat when in idle for too long (more than 10-15 minutes)

Abs light on 95 Ford ranger where is control mod located

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com