Chevrolet Silverado 1500 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Chevrolet Silverado 1500 Wheel Bearings Replacement is $329 with $189 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Chevrolet Silverado 1500V8-5.3L HybridService typeWheel Bearings - Driver Side Front ReplacementEstimate$550.08Shop/Dealer Price$648.94 - $936.59
2005 Chevrolet Silverado 1500V8-5.3L HybridService typeWheel Bearings - Passenger Side Front ReplacementEstimate$645.67Shop/Dealer Price$762.02 - $1105.72
2012 Chevrolet Silverado 1500V6-4.3LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$804.39Shop/Dealer Price$967.38 - $1451.77
2016 Chevrolet Silverado 1500V6-4.3LService typeWheel Bearings - Driver Side Front ReplacementEstimate$1008.93Shop/Dealer Price$1223.06 - $1860.84
2006 Chevrolet Silverado 1500V6-4.3LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$645.67Shop/Dealer Price$763.97 - $1109.13
2001 Chevrolet Silverado 1500V8-5.3LService typeWheel Bearings - Driver Side Front ReplacementEstimate$601.87Shop/Dealer Price$717.84 - $1061.25
2004 Chevrolet Silverado 1500V8-4.8LService typeWheel Bearings - Driver Side Front ReplacementEstimate$645.67Shop/Dealer Price$762.07 - $1105.81
2017 Chevrolet Silverado 1500V8-5.3LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$1008.93Shop/Dealer Price$1223.06 - $1860.84
Show example Chevrolet Silverado 1500 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Chevrolet Silverado 1500 Wheel Bearings Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

2007 Nissan Versa vs. 2007 Saturn Ion: Which One Should I Buy?
Compact cars as a class are generally meant to be commuter vehicles: with excellent gas mileage, an entry-level price point, and decent safety ratings for those who are on the road the majority of their time. These cars also make...
How to Read a VIN (Vehicle Identification Number)
A car VIN (Vehicle Identification Number) contains unique information about where the car was made and can be found in your car or online.
The Guide to Legal Car Modifications in Nebraska
ARENA Creative / Shutterstock.com If you live in Nebraska or plan to move to the state and you have a modified vehicle, you need to know the laws and regulations to make sure your car or truck...

A/C problem on 06 Mitsubishi Lancer ES

If you are getting power to the compressor but the compressor clutch is not engaging then you may have a bad clutch coil. Sometimes the clutch coil will get weak and not be able to engage the clutch when it...

car vibrates when driving .

Hello. I will help you with your question relative to the vibration problem you are experiencing with your 2007 Lexus ES350. If the vibration is occurring only during "moderate to strong" acceleration, but not during coasting, it is likely caused...

Astrostart

I believe you are referring to a remote start system. These systems are great in the colder climates for warming up the vehicle without having to physically walk out and start the car. These systems do not harm the battery...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com