Chevrolet Blazer Ignition Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(242)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(242)

Ignition Switch Replacement Service

How much does a Ignition Switch Replacement cost?

On average, the cost for a Chevrolet Blazer Ignition Switch Replacement is $366 with $198 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Chevrolet BlazerV6-4.3LService typeIgnition Switch ReplacementEstimate$759.42Shop/Dealer Price$878.98 - $1221.44
2004 Chevrolet BlazerV6-4.3LService typeIgnition Switch ReplacementEstimate$687.64Shop/Dealer Price$790.22 - $1089.72
2005 Chevrolet BlazerV6-4.3LService typeIgnition Switch ReplacementEstimate$687.64Shop/Dealer Price$790.27 - $1089.81
1996 Chevrolet BlazerV6-4.3LService typeIgnition Switch ReplacementEstimate$713.34Shop/Dealer Price$822.40 - $1141.20
1998 Chevrolet BlazerV6-4.3LService typeIgnition Switch ReplacementEstimate$664.80Shop/Dealer Price$774.62 - $1091.33
2002 Chevrolet BlazerV6-4.3LService typeIgnition Switch ReplacementEstimate$570.85Shop/Dealer Price$672.16 - $970.70
2001 Chevrolet BlazerV6-4.3LService typeIgnition Switch ReplacementEstimate$814.40Shop/Dealer Price$931.43 - $1272.01
Show example Chevrolet Blazer Ignition Switch Replacement prices

What is the Ignition Switch all about?

The ignition switch, located on the steering column or in the dashboard, takes the power from the battery and directs it to all the accessories and electrical components of your car. It also transfers the power to the starter when you turn the ignition key. If the starter does not receive power from the ignition key, the car will not start. When the ignition switch goes bad, your car may not start and the accessories (lights, radio, etc.) may not work. Replacing an ignition switch can be as simple as removing a few screws to access the ignition switch, or as complicated as removing the whole steering column.

Ignition Switch

Keep in mind:

  • After an ignition switch is replaced, all electrical components should be checked to ensure proper operation.

How it's done:

  • Check the condition of the ignition switch.
  • Remove and replace the ignition switch if it is bad.
  • Verify operation of electrical components.

Our recommendation:

The battery feeds power to ignition switch, so it is important for the ignition system that the battery is in good condition. Don't put too much weight on your key ring because this can damage the key and the tumbler part of the ignition switch. If there is no power inside the car (none of the electrical components are working), have the mechanic inspect the main fuses. If the fuses are good, then the mechanic should inspect the ignition switch and other electrical components.

What common symptoms indicate you may need to replace the Ignition Switch?

  • Car may not start.
  • Car starts then dies.
  • Some electrical components may not work (radio, clock, lights, etc.).

How important is this service?

The ignition switch serves to send power from the battery. When you turn your key to turn on your vehicle, the ignition switch takes power from the battery and sends it to the starter, which allows your vehicle to turn on. When you turn on any electrical components in your vehicle (such as your lights, radio, and air conditioning), the ignition switch draws power from the battery, and sends it to these electrical components to power them. When your ignition switch stops working, your starter and your electrical components have no way of drawing power from your battery. With a faulty ignition switch, you won’t be able to use your radio, lights, or air conditioning, and you won’t be able to turn on your vehicle. In extreme cases, a broken ignition switch won’t allow you to turn your vehicle off, even if you remove the key.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(242)

Rating Summary
224
5
3
3
7
224
5
3
3
7

Joshua

6 years of experience
35 reviews
Joshua
6 years of experience
Blazer 2003 - Check Engine Light is on - Lewisville, TX
Diagnosed my vehicles problem and gave me a more than reasonable quote to fix it.

Alexander

5 years of experience
126 reviews
Alexander
5 years of experience
Blazer 2000 - Brake Master Cylinder - Blacklick, OH
GREAT PERSON THAT CARES.

Nazareth

24 years of experience
219 reviews
Nazareth
24 years of experience
Blazer 2001 - Car door is sagging - Covina, CA
He was very polite and explain what was going with my door. I would have never guess. So I do thank him. I will request him again.

Gabriel

12 years of experience
39 reviews
Gabriel
12 years of experience
Blazer 2002 - Car will not turn over - Colorado Springs, CO
Very good

Excellent Rating

(242)

Rating Summary
224
5
3
3
7
224
5
3
3
7
Number of Chevrolet Blazer services completed
2662+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

What Is the Difference Between a Timing Belt and a Timing Chain?
What are timing belts and timing chains, and how do they differ from one another? Well, the simple answer is that one is...
P2285 OBD-II Trouble Code: Injector Control Press Sensor Circuit Low
P2285 P2285 code definition Injector Control Press Sensor Circuit Low What the P2285 code means P2285 is an OBD-II generic code for the engine control module (ECM) detecting the injector control pressure (ICP) sensor is low and below specified sensor...
P3425 OBD-II Trouble Code: Cylinder 4 Deactivation/Intake Valve Control Circuit/Open
P3425 means the PCM is not receiving the proper values from the MAP, MAF, and TP sensors to enter 4 cylinder mode due to low oil level or pressure.

Throttle body failing - 2004 Honda Accord

Hello. This may be related to a variety of things such as a vacuum leak (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak) (high idle is caused by this many times), a faulty mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement), a failing throttle body sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement). The fact that...

Can p0717 trigger p0700 on 2006 Equinox?

Both the codes P0700 and P0717 are to the transmission input shaft speed sensor and most likely are related codes. You should have transmission input speed sensor replaced and codes cleared and then see if any codes or problems return....

Car makes a rattling noise then accelerating though 3rd/4th when cold

This can be caused by engine running too lean when cold and causing the rattle under load. Try to have the mass air sensor cleaned to see if problem stops? If not then have mass air sensor replaced and the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com