Buick Terraza Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Buick Terraza Power Steering Pressure Hose Replacement is $290 with $94 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Buick TerrazaV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$618.20Shop/Dealer Price$723.54 - $1028.22
2007 Buick TerrazaV6-3.9LService typePower Steering Pressure Hose ReplacementEstimate$391.99Shop/Dealer Price$441.45 - $584.08
2005 Buick TerrazaV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$605.59Shop/Dealer Price$708.49 - $1011.34
2006 Buick TerrazaV6-3.9LService typePower Steering Pressure Hose ReplacementEstimate$391.99Shop/Dealer Price$441.49 - $584.14
Show example Buick Terraza Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Miguel

36 years of experience
258 reviews
Miguel
36 years of experience
Buick Terraza V6-3.5L - Car is not starting - Jacksonville, Florida
he is great at what he does, i would recommend him to anyone thank you miguel we appreciate you

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Buick Terraza V6-3.5L - Radiator - Newport News, Virginia
One of the best person I've met not just as an mechanic but a good person all around took no time for him to do what he does best ! If I could give 10 stars I would Thank you much for you time and service Matthew I greatly appreciate it and my vehicle is running great !

Raymond

37 years of experience
63 reviews
Raymond
37 years of experience
Buick Terraza V6-3.5L - Door will not open - Kent, Washington
Nice and experieced

Art

26 years of experience
88 reviews
Art
26 years of experience
Buick Terraza V6-3.5L - 75,000 Miles Maintenance Service - Orlando, Florida
I scheduled to have a simple tune-up done to our family van before traveling before the holidays and Your Mechanic sent us Art. Art was simply fantastic! He called me twice and let me know that he was on his way and then he showed up 5 minutes before he was scheduled to be at my house. Not only did he complete the inspection an maintenance quickly, but he was very informative, straight forward and answered all of my questions. Art then went above and beyond by fixing the broken arm on our driver's seat, the trunk door handle, and found the mystery leak in our car. My family and I truly appreciate this mechanic and I thoroughly enjoyed his services.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Buick Terraza services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

P2173 OBD-II Trouble Code: Throttle Actuator Control System - High Airflow Detected
P2173 code definition Throttle Actuator Control System - High Airflow Detected What the P2173 code means Code P2173 means that there is...
P2649 OBD-II Trouble Code: ‘A’ Rocker Arm Actuator Control Circuit High Bank 1
P2649 P2649 code definition ‘A’ Rocker Arm Actuator Control Circuit High Bank 1 What the P2649 code mean P2649 is an OBD-II code for the engine control module (ECM) detecting the ‘A’ rocker arm actuator control circuit for bank 1...
How to Buy a Good Quality Dog Crate for Road Trips
Heading Heading out in the car for a road trip is an exciting and fun event, but if you’re taking your dog along with you, then a good quality dog crate is in order. A dog crate ensures that your...

What does the fuel gauge show?

The fuel gauge is located on the instrument panel, and tells you how full your fuel tank is. The gauge has an F (Full) on one end, and an E (Empty) on the other. Where the hand points to lets...

My park assist is turned off - how do I turn it back on?

Hello - most often, this message appears when something blocks the rear parking assist sensors on the rear bumper (dirt, snow, bumper stickers, trailer towing gear, etc.). Wipe off the sensors with a damp or soapy paper towel, drive forward...

2007 ford f 150 high beams work but when switched to low beams passenger side doesn't work

You need to check fuse numbers 23 and 25 in the fuse box inside right kick panel for a blown fuse and power to fuses with headlights on? If fuse is bad then replace and see if light now works?...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com