BMW X5 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(824)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(824)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a BMW X5 Power Steering Pump Replacement is $575 with $393 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 BMW X5L6-3.0LService typePower Steering Pump ReplacementEstimate$1341.46Shop/Dealer Price$1624.91 - $2452.56
2002 BMW X5L6-3.0LService typePower Steering Pump ReplacementEstimate$1327.04Shop/Dealer Price$1605.54 - $2429.49
2002 BMW X5V8-4.4LService typePower Steering Pump ReplacementEstimate$1443.95Shop/Dealer Price$1761.72 - $2705.51
2001 BMW X5L6-3.0LService typePower Steering Pump ReplacementEstimate$1327.04Shop/Dealer Price$1605.61 - $2429.61
2009 BMW X5V8-4.8LService typePower Steering Pump ReplacementEstimate$4795.46Shop/Dealer Price$5693.78 - $8260.20
2013 BMW X5V8-4.4L TurboService typePower Steering Pump ReplacementEstimate$1560.27Shop/Dealer Price$1775.43 - $2379.22
2005 BMW X5L6-3.0LService typePower Steering Pump ReplacementEstimate$1327.04Shop/Dealer Price$1605.66 - $2429.68
2010 BMW X5V8-4.4L TurboService typePower Steering Pump ReplacementEstimate$4138.51Shop/Dealer Price$4996.93 - $7533.42
Show example BMW X5 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(824)

Rating Summary
769
16
10
8
21
769
16
10
8
21

Nathan

13 years of experience
7 reviews
Nathan
13 years of experience
BMW X5 L6-3.0L Turbo - Shock Absorber Replacement (Front) - Venus, Texas
A real pro. He was informative checked and did repair very well with precision. Would trust him with any of my other vehicles.

Grzegorz

42 years of experience
473 reviews
Grzegorz
42 years of experience
BMW X5 L6-3.0L Turbo - Drive Belt Tensioner - San Francisco, California
he is good and professional

Noe

37 years of experience
604 reviews
Noe
37 years of experience
BMW X5 L6-3.0L - Door will not open - Bellevue, Washington
Called when he knew he will be late.

Terry

19 years of experience
51 reviews
Terry
19 years of experience
BMW X5 V8-4.4L - Oil/Fluid Leak - Marietta, Georgia
Terry was very nice and he was happy to do whatever was necessary to diagnose the problems or answer any questions, and he knew what he was doing

Excellent Rating

(824)

Rating Summary
769
16
10
8
21
769
16
10
8
21
Number of BMW X5 services completed
9064+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

P0112 OBD-II Trouble Code: IAT Sensor Circuit Low Input Problem
P0112 P0112 code definition Intake Air Temperature (IAT) sensor circuit low input problem What the P0112 code means P0112 is the OBD-II generic code that the engine control module (ECM) has recorded the IAT sensor input below the expected sensor...
Saturn Certified Pre-Owned (CPO) Car Program
Drivers Drivers who are shopping around for a used Saturn vehicle may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on to...
The Guide To Colored Curb Zones in Minnesota
Minnesota Minnesota parking laws: understanding the basics Knowing how and where to park legally in Minnesota is just as important as knowing the rules of being on the road, such as the speed limits and proper signaling and lane changing...

I replaced the fuel pump in my 2014 Chevrolet Cruze and it still will not stay running.

Hello. From what you are saying I do not think that you had a fuel pump issue to begin with. This engine has a history of vacuum leaks that can form or valve timing solenoids that can fail. These are...

Changed radiator and cooler hoses(2 at 3/8" wide), the ones that run to the bottom of radiator. The car now when starts wont move

You will need to add about 1 quart of fluid that was lost when the radiator and hoses were changed. Check transmission level and if problem continues then you may need to have transmission checked. Just low on fluid will...

my 1993 previa was working fine when I parked it for a year or more, I tried to start it, the electrical part is fine but did not

Gasoline has a relatively limited shelf life. If gasoline was left in the fuel tank for more than 6 months, to get the car running the tank will possibly have to be thoroughly drained and cleaned. In all events, if...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com