Audi S7 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(5)

Fuel Injector Replacement Estimate for Audi S7

Audi S7 Fuel Injector Replacement costs $3065 on average.

CarServiceEstimateShop/Dealer Price
2016 Audi S7V8-4.0L TurboService typeFuel Injector ReplacementEstimate$6127.67Shop/Dealer Price$7695.86 - $12172.02
2015 Audi S7V8-4.0L TurboService typeFuel Injector ReplacementEstimate$5593.07Shop/Dealer Price$7023.39 - $11111.74
2013 Audi S7V8-4.0L TurboService typeFuel Injector ReplacementEstimate$5593.07Shop/Dealer Price$7023.37 - $11111.72
2017 Audi S7V8-4.0L TurboService typeFuel Injector ReplacementEstimate$6098.67Shop/Dealer Price$7601.29 - $12028.28
2014 Audi S7V8-4.0L TurboService typeFuel Injector ReplacementEstimate$5593.07Shop/Dealer Price$7023.49 - $11111.92
2018 Audi S7V8-4.0L TurboService typeFuel Injector ReplacementEstimate$6097.99Shop/Dealer Price$7600.51 - $12027.03
Show example Audi S7 Fuel Injector Replacement prices

Fuel Injector Replacement Service

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

AL

12 years of experience
226 reviews
AL
12 years of experience
Audi S7 V8-4.0L Turbo - Spark Plugs - Denver, Colorado
Al was extremely friendly and knows exactly what he is doing. Gave me a few pointers to keep an eye on to keep the car running healthy Thank you again!

Christopher

10 years of experience
98 reviews
Christopher
10 years of experience
Audi S7 V8-4.0L Turbo - Brake Rotor/Disc Replacement (Front) - Katy, Texas
Friendly and timely.

Engel

23 years of experience
5 reviews
Engel
23 years of experience
Audi S7 V8-4.0L Turbo - Pre-purchase Car Inspection - Arlington, Virginia
Fully explained what he saw of the car in PPI and made me feel confident in the health of the vehicle. Responded in timely manner when I messaged him. Great experience all around.

Nazareth

27 years of experience
236 reviews
Nazareth
27 years of experience
Audi S7 V8-4.0L Turbo - Battery - El Monte, California
Excellent and very professional. Highly recommended!!! Took care of my Audi S7 and solved my problem with the car.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Audi S7 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How to Replace the Oil Temperature Sensor on Most Cars
Oil, as well as the oil temperature sensor, is crucial to the engine lubrication system. A bad sensor can lead to leaks and poor vehicle performance.
What Do the Immobilizer Warning Lights Mean?
The immobilizer warning light turns on if your anti-theft system does not recognize the car key being used, if it's the wrong key or low on battery.
P0529 OBD-II Trouble Code: Fan Speed Sensor Circuit Intermittent
P0529 means the cooling fan sent an incorrect voltage signal, caused by open/shorted/corroded wiring, or a damaged fan motor/relay/speed sensor.

Car Ignition doesn't work. To turn it on you have to switch a box under the steering wheel that came out. I don't know how to fix

Hi there. It is possible that somebody has installed an aftermarket or bypass ignition system on this vehicle, as the standard OEM ignition lock cylinder is not configured like what you have described. It would probably be best to have...

Rattling sound under the car.

Hi there. If you have a flex plate or a flywheel on your vehicle, the nose could be a loose bolt causing the rattling noise as the engine is running. If the noise lessens out as the engine is revved...

Noisy lifters 1991 Mitsubishi Montero

Hello - your "noisy lifters" could have a couple of causes: worn out lifters (they're hydraulic by the way, not adjustable), or poor oil supply to them. Poor oil supply could be a blocked oil passage, worn out oil pump,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com