Audi S5 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(63)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(63)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Audi S5 Power Steering Pump Replacement is $701 with $449 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Audi S5V6-3.0L TurboService typePower Steering Pump ReplacementEstimate$1177.10Shop/Dealer Price$1417.83 - $2103.55
2018 Audi S5V6-3.0L TurboService typePower Steering Pump ReplacementEstimate$1240.92Shop/Dealer Price$1488.76 - $2224.84
2016 Audi S5V6-3.0L TurboService typePower Steering Pump ReplacementEstimate$1200.88Shop/Dealer Price$1443.77 - $2153.62
2008 Audi S5V8-4.2LService typePower Steering Pump ReplacementEstimate$1536.73Shop/Dealer Price$1831.73 - $2687.45
2011 Audi S5V6-3.0L TurboService typePower Steering Pump ReplacementEstimate$2877.16Shop/Dealer Price$3545.75 - $5517.78
2011 Audi S5V8-4.2LService typePower Steering Pump ReplacementEstimate$1536.73Shop/Dealer Price$1832.71 - $2689.17
2010 Audi S5V8-4.2LService typePower Steering Pump ReplacementEstimate$1536.73Shop/Dealer Price$1831.84 - $2687.64
2015 Audi S5V6-3.0L TurboService typePower Steering Pump ReplacementEstimate$1200.88Shop/Dealer Price$1443.77 - $2153.61
Show example Audi S5 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(63)

Rating Summary
59
3
0
0
1
59
3
0
0
1

Colin

28 years of experience
117 reviews
Colin
28 years of experience
Audi S5 V8-4.2L - Oil Filter Housing Gasket - Saint Petersburg, Florida
Very knowledgeable about German engineering. I will request Colin for all my jobs.

Joe

44 years of experience
838 reviews
Joe
44 years of experience
Audi S5 V8-4.2L - Oil Change - Tampa, Florida
Joe did a fantastic job on my car. He really seems to know his stuff. I would definitely recommend him again. He arrived on time and answered any questions that I had. Great Work!

James

32 years of experience
705 reviews
James
32 years of experience
Audi S5 V8-4.2L - Pre-purchase Car Inspection - Irvine, California
Awesome service!!! Will use James again!

Michael

26 years of experience
199 reviews
Michael
26 years of experience
Audi S5 V8-4.2L - Oil Change - Charlotte, North Carolina
Michael was very personable and knowledgeable and I would definitely recommend him to other customers who believe in honest and trustworthy service

Excellent Rating

(63)

Rating Summary
59
3
0
0
1
59
3
0
0
1
Number of Audi S5 services completed
693+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

How to Clean an Engine
As As cars get older, they tend to accumulate quite a bit of dirt and grime from those miles spent on roads and freeways. It does not help either that leftover fluids that had previously leaked from old repairs are...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Michigan
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Michigan at the Michigan Trucking Association.
The Guide To Colored Curb Zones in Wyoming
Wyoming Wyoming parking laws: understanding the basics Driving is a big responsibility, and people know that they need to pay attention behind the wheel. They need to be careful of their actions, and they have to be aware of the...

Code for fuel level sensor.

This means that the sensor inside your fuel tank isn't reading properly. This could mean faulty fuel gauge readings and could even leave you stranded without fuel. I suggest having a qualified technician, like one from YourMechanic to diagnose and...

Code P1509

The code P1509 is a problem with the idle air control valve or circuit. The most common failure is an idle air control valve internal short. It is possible that the valve may need to be replaced. I recommend having...

Car radio

Depending on the make and model of the vehicle, the radio, clock, and dome ,lights may be on the same circuit and can be as simple as a blown fuse, or fuses. Sometimes there can be more than one fuse...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com