Audi Cabriolet Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,385)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,385)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Audi Cabriolet Throttle Body Replacement is $840 with $745 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Audi CabrioletV6-2.8LService typeThrottle Body ReplacementEstimate$1605.69Shop/Dealer Price$1995.87 - $3127.02
1994 Audi CabrioletV6-2.8LService typeThrottle Body ReplacementEstimate$1585.69Shop/Dealer Price$1975.90 - $3107.07
1996 Audi CabrioletV6-2.8LService typeThrottle Body ReplacementEstimate$1585.69Shop/Dealer Price$1975.90 - $3107.07
1995 Audi CabrioletV6-2.8LService typeThrottle Body ReplacementEstimate$1585.69Shop/Dealer Price$1975.86 - $3107.00
1998 Audi CabrioletV6-2.8LService typeThrottle Body ReplacementEstimate$1585.69Shop/Dealer Price$1975.92 - $3107.12
Show example Audi Cabriolet Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,385)

Rating Summary
2,214
84
19
12
56
2,214
84
19
12
56

Stephen

32 years of experience
178 reviews
Stephen
32 years of experience
Audi Cabriolet V6-2.8L - Car is not starting - Westminster, Colorado
He was able to diagnosed the problem, and able to fix ed my car. He's the only one, in fact. Thank you Stephen.

Brikk

18 years of experience
389 reviews
Brikk
18 years of experience
Audi Cabriolet V6-2.8L - Window is not working - Charlotte, North Carolina
Brick is very thorough and makes sure he does the job right.

Alex

16 years of experience
435 reviews
Alex
16 years of experience
Audi A5 Quattro V6-3.2L - Throttle Body - The Colony, Texas
Alex was very professional and knowledgeable. The dealership quoted me $1200 to replace the throttle body. I found the part for $320 and Alex charged me $98. Alex arrived on time and completed the install under an hour. He suggested other services that my car might need but was not pushy. I will definitely use this service again and will recommend Alex as my technician.

Ben

41 years of experience
1410 reviews
Ben
41 years of experience
Audi A4 L4-1.8L Turbo - Windows - Houston, Texas
I was extremely pleased with the efficency and quality of work with Ben. This is so refreshing to encounter a technician with this skill level and experience. In addition Ben has a very nice personality. On a scale of 1 to 10 I would rate him a 10. The cost of the repair was more than fair and that had a lot to do with his experience and efficiency.

Excellent Rating

(2,385)

Rating Summary
2,214
84
19
12
56
2,214
84
19
12
56
Number of Audi services completed
26235+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

P0137 OBD-II Trouble Code: O2 Sensor Circuit Low Voltage (Bank 1, Sensor 2)
P0137 code definition O2 Sensor Circuit Low Voltage (Bank 1, Sensor 2) What the P0137 code means P0137 is the OBD-II generic...
How to Get Hyundai Dealership Certified
Hyundai dealerships offer automotive technician jobs to mechanics who are certified through Professional Automotive Career Training and Global e-Campu
P0382 OBD-II Trouble Code: Glow Plug / Heater Circuit "B" Malfunction
Trouble code P0382 means the glow plug in heater circuit B for a diesel engine has malfunctioned, often due to faulty glow plug wiring or open fuse.

Car shuts off after idling for 15min

Hi there: The fact you noticed milky oil is an instant indicator that you've got a major mechanical issue where coolant or water is entering oil galleys. Even if the engine doesn't overheat, you still might have a crack in...

car starting

There are many causes of hard starting but illustrative ones are a faulty engine coolant temperature switch (sensor), inadequate fuel delivery or pressure (e.g., clogged fuel filter), dirty fuel injectors, contaminated or old gasoline, malfunctioning idle air control valve, poor...

Temp gauge is illuminated. Low [coolant](/topics-coolant-nissan/) so i added more. No leaks but yet the light still on. Not overheating either

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com