Audi allroad Engine hesitates during acceleration Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(10)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(10)

Engine hesitates during acceleration Inspection Service

How much does a Engine hesitates during acceleration Inspection cost?

On average, the cost for a Audi allroad Engine hesitates during acceleration Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Audi allroadL4-2.0L TurboService typeEngine hesitates during acceleration InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2015 Audi allroadL4-2.0L TurboService typeEngine hesitates during acceleration InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2013 Audi allroadL4-2.0L TurboService typeEngine hesitates during acceleration InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2016 Audi allroadL4-2.0L TurboService typeEngine hesitates during acceleration InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
Show example Audi allroad Engine hesitates during acceleration Inspection prices

It can be frustrating for any driver to expect certain acceleration from their vehicle only to find that the vehicle seems to be hesitant while speeding up. This hesitation could be potentially dangerous in situations like entering and exiting the highway from an off-ramp, where acceleration may be necessary to merge with traffic. A vehicle that struggles or hesitates to accelerate may be unpredictable and moments of hesitation may be coupled with equally dangerous moments of surging or unexpected acceleration. When a vehicle is hesitating during acceleration, it should be inspected by a mechanic.

How this system works:

A vehicle with a combustion (gas or diesel) engine requires an exact mixture of fuel and air to run efficiently. If this mixture is thrown off in any way, it may result in an engine running too lean (not enough air), or too rich (not enough fuel). An engine that is hesitating to accelerate is most likely dealing with a fuel/air mixture that is too lean. Engine’s that are running inefficiently will begin to show signs like hesitation which will only become worse over time. If you notice some symptoms like hesitation, you should have your vehicle inspected immediately.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a mass airflow sensor begins to fail, it will typically generate an error code or “Check Engine light.” This warning may be accompanied by hesitation while accelerating, or while driving up a hill. A vehicle with a failing mass airflow sensor may also stall soon after starting.

  • Fuel Pump: The fuel pump in most modern vehicles sits inside the fuel tank and pumps fuel up to the engine. If a fuel pump cannot provide the correct pressure, fuel may have difficulty making it to the engine. A vehicle that hesitates while accelerating or while driving up a hill may have a weak fuel pump.

  • Throttle position sensor: A throttle position sensor tells the vehicle’s computer how far the throttle is open and how hard the accelerator is being pressed. The computer is then able to adjust the fuel/air mixture going to the engine so that is stays at an appropriate level. If the throttle position sensor is not working properly, it may be sending incorrect information to the vehicle’s computer. The computer may then not provide the engine with the correct amount of air while accelerating, causing a hesitation sensation.

  • Dirty/failing fuel injectors: Fuel injectors spray fuel in a fine mist into the cylinder where it is mixed with air and ignited by a spark plug. Fuel injectors may become dirty over time and not be able to provide as much fuel to the cylinder as is needed. Dirty fuel injectors may cause the engine to run lean which will in turn, cause hesitation when accelerating.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle is hesitating while accelerating. The mechanic will then provide a detailed inspection report outlining the nature of the hesitation and the cost of any repairs that need to be made.

How it's done:

A mechanic will first plug into your vehicle’s computer using a code reader/scanner to better identify what the exact issue is. In addition to reading trouble codes, he or she should also be able to get readings of oxygen/fuel intake to make sure those numbers are where they should be. Once the mechanic gets this information they can begin to fix any potential issues.

If the mechanic believes that the mass airflow sensor has gone bad or is failing, he or she will first examine the sensor for any superficial damage. The mechanic will also ensure that the sensor is wired correctly and that no damage has been done to the wire harness. The mechanic should then remove the mass airflow sensor and replace it with a new one if necessary.

If the mechanic believes the problem is the fuel pump, he or she will remove the fuel tank if necessary to inspect the pump. If the pump has indeed failed, the mechanic will replace it. If the fuel tank itself it beginning to show signs of age, it may be convenient to change the pump and tank at the same time.

If the mechanic suspects the throttle position sensor, he or she will test the throttle position sensor and it’s wiring to see if it is functioning properly. If it is not, the mechanic will remove the throttle positioning sensor and the wiring and replace them. In between removing the old sensor and replacing the new one, the mechanic should take the opportunity to clean the throttle body. The mechanic will then ensure the new throttle positioning sensor is working properly and transmitting the correct information to the vehicle’s computer.

If the mechanic believe the problem is dirty or failing fuel injectors, he or she will inspect the injectors to check for any signs of damage or leakage. The mechanic should also take this opportunity to replace the fuel filter if it is not a part of the fuel pump. They will then replace the injectors and test them to make sure they are functioning properly.

In all cases, the mechanic will start the vehicle to make sure that all of the new components are working properly. In the event that an issue has caused a warning light to come on, the mechanic will be able to clear the trouble code associated with the light using a reader/scanner.

How important is this service?

Sluggish acceleration can be annoying for drivers who expect more power form their car, but it can also be dangerous in certain situations. The unpredictable nature of an engine that hesitates can increase the chance of a potential accident especially when trying to merge in and out of heavy traffic. If you notice that your vehicle seems to be underpowered, especially when accelerating, you should not drive it if possible until it can be inspected by a mechanic.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

Miguel

21 years of experience
232 reviews
Miguel
21 years of experience
Audi allroad L4-2.0L Turbo - Brake Pads Replacement (Front) - Fair Lawn, New Jersey
Miguel is very professional mechanic. He called me in advance about his coming. He brought the quality parts (brakes pads and rotors) and done his job quickly and of great quality. I tested the brakes after the replacement and they were efficient and very silent. I would recommend him very much.

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Audi allroad L4-2.0L Turbo - Brake Pads Replacement (Rear) - San Pedro, California
Excellent service on my car.

Rick

47 years of experience
43 reviews
Rick
47 years of experience
Audi allroad L4-2.0L Turbo - Oil Change - Littleton, Colorado
on time, clear explanation and very good work

Joseph

20 years of experience
644 reviews
Joseph
20 years of experience
Audi allroad L4-2.0L Turbo - Cabin Air Filter - Salt Lake City, Utah
Joseph was very helpful and gave me a professional opinion about the quality of my car and the future services it would require. It was my first experience with YourMechanic and I will definitely be using the service (and Joseph) again!

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of Audi allroad services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How to Prevent Having Your Car Stolen
Protecting Protecting your vehicle from auto thieves can save you the hassle of trying to recover a stolen car or from having to buy another to replace it. You can choose from many options to protect your vehicle, including using...
How to Transfer a Car Title in Minnesota
Without Without a car title in your name, there is no proof that you actually own the vehicle. Obviously, this is a crucial document, and it’s important that it be transferred from one owner to the next when the vehicle...
P0961 OBD-II Trouble Code: Pressure Control Solenoid A Control Circuit Range/Performance
P0961 means the voltage levels are outside of preset automaker variance allowances due to faulty wiring, solenoid, or low/dirty transmission fluid.

gas light loose and check engine light comes on I replaced gas cap and the issue still happens

The gas cap is the most common source of evaporative emissions, which would be a reason the check engine light would come on. The evaporative emissions system is designed to limit the evaporation of fumes from the fuel in your...

I need to know if the transmission # 43000 8A811 is the right # for the hyundai areo space 2005 D6AB engine

Hello. For specific part numbers I would refer to to the Hyundai Motors website. From there you should be able to locate your region, which should offer some sort of technical support or contact through an email or separate website....

Oil leaking in the bottom chassis. 2009 Chevrolet

Hello - there are 2 possibilities for an oil leak (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-an-oil-leak) underneath the chassis as you describe. Engine oil, perhaps from the front crankshaft seal, or a timing cover leak, or a leaking power steering pump or hose. Power steering...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com