Audi 100 Auxiliary Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2)

Auxiliary Water Pump Replacement Service

How much does a Auxiliary Water Pump Replacement cost?

On average, the cost for a Audi 100 Auxiliary Water Pump Replacement is $468 with $268 for parts and $199 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Audi 100L5-2.3LService typeAuxiliary Water Pump ReplacementEstimate$777.54Shop/Dealer Price$948.31 - $1377.92
1990 Audi 100L5-2.3LService typeAuxiliary Water Pump ReplacementEstimate$735.54Shop/Dealer Price$906.37 - $1336.03
1991 Audi 100L5-2.3LService typeAuxiliary Water Pump ReplacementEstimate$735.54Shop/Dealer Price$906.37 - $1336.02
Show example Audi 100 Auxiliary Water Pump Replacement prices

What is the Water Pump (Auxiliary) all about?

When most people hear the term “water pump”, their immediate thought is the pump that propels engine coolant through the engine, keeping it within optimum operating temperature. While that is certainly the most important one, there’s actually another pump on your car in some models and makes (not all cars have an auxiliary pump).

The auxiliary water regulates temperature on the car’s inside during cold days. It’s responsible for sending additional hot coolant through the car’s heater core, allowing you to work the heater (your car’s heater uses engine heat to warm the air that’s blown out of the vents). They were first used in the 1980s on diesel vehicles, but since then have seen adoption on gasoline engines as well.

Keep in mind:

  • The auxiliary water pump is an electronic component, which, unlike the primary water pump that is activated by the drive belt, uses an electric motor to pump coolant.

  • Over time, these pumps do wear out and will need to be replaced.

How it's done:

  • The vehicle is raised and secured on jack stands and the coolant is drained

  • The water pump hoses are disconnected and the pump is removed

  • The new water pump is installed and the hoses are connected

  • The coolant is filled and the water pump and hoses are checked for leaks

  • The vehicle is removed from the jack stands and the engine is checked for proper operation. The vehicle is road tested for proper operation

Our recommendation:

Your best defense against a failed auxiliary water pump is to work with our expert mechanics that understand that these pumps are becoming more common, and can account for the pump’s presence when diagnosing heater problems. Note that auxiliary water pump failure will not affect the blower motor or the air conditioner operation – it only affects the production of heat, and these symptoms can range from creating mildly warm air to the heater blowing cold air.

What common symptoms indicate you may need to replace the Water Pump (Auxiliary)?

  • Heater does not produce much warm air in stop-and-go traffic

  • Heater does not release any warm air

How important is this service?

While replacing a failed auxiliary water pump is not critical for vehicle performance, it can be an inconvenience, particularly during the middle of winter if your heater can’t keep you warm. Your heater may also have trouble keeping your windows clear on humid and cold days. If you notice your car’s heater is not working properly, have it diagnosed by one of our expert mechanics.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2)

Rating Summary
2
0
0
0
0
2
0
0
0
0

Frank

8 years of experience
130 reviews
Frank
8 years of experience
Audi 100 V6-2.8L - Pre-purchase Car Inspection - Chicago, Illinois
Frank was great - kept me informed and performed a solid inspection of a vintage car that I was purchasing 800 miles from home.

Bereketeab

7 years of experience
110 reviews
Bereketeab
7 years of experience
Audi 100 V6-2.8L - Spark Plugs - Sacramento, California
Goes above and beyond, helped save my coil pack when a plug wire was stuck in it. He didn't give up and got it out and finished the job.

Roberto

12 years of experience
308 reviews
Roberto
12 years of experience
Audi A4 L4-2.0L Turbo - Water Pump (Auxiliary) - Houston, Texas
Mr. Roberto was amazing, it took him no time to re-diagnose my car issue. Me. Roberto is very professional and confident in what he does. I would recommend him to ALL my friends. Thank you again Mr. Roberto

Clarissa

27 years of experience
239 reviews
Clarissa
27 years of experience
Audi A8 Quattro V8-4.2L - Water Pump (Auxiliary) - Media, Pennsylvania
Timely efficient, pleasant, knowledgeable.

Excellent Rating

(2)

Rating Summary
2
0
0
0
0
2
0
0
0
0
Number of Audi Auxiliary Water Pump Replacement services completed
22+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

4 Essential Things to Know About Your Car’s Parking Brake
The parking brake is also called the emergency brake, or hand brake, and is used to keep the vehicle in place. The...
How to Clean an Engine
As As cars get older, they tend to accumulate quite a bit of dirt and grime from those miles spent on roads and freeways. It does not help either that leftover fluids that had previously leaked from old repairs are...
How to Replace Driver Side Air Bags
If If you’ve ever seen an airbag deploy, you will know that it is not a particularly pleasant experience. The airbag is designed to inflate in fractions of a second (https://www.yourmechanic.com/article/how-air-bags-work) so that when you come into contact with it,...

Automatic transmission not shifting properly.

The computer on these cars are prone to interference if the owner has put on an aftermarket code scanner to the ALDL connector to scan the computer. Some owners use these to monitor system functions or for other reasons. These...

Do I need a whole new ignition or just the ignition switch?

You will need to have the damage to the ignition lock cylinder housing checked to see if just the lock cylinder can be replaced if no damage to housing was done. You will need to have the door and trunk...

The clutch was slipping, started working fine again, and shortly thereafter it wouldn't shift out of neutral.

If the clutch is slipping while "released" (engaged with the flywheel), the clutch friction material must be replaced as well as possibly other components such as the pressure plate, throw out bearing and other components. In addition, the flywheel has...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com