Audi 100 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Audi 100 Power Steering Pump Replacement is $505 with $253 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Audi 100V6-2.8LService typePower Steering Pump ReplacementEstimate$830.76Shop/Dealer Price$970.31 - $1359.17
1992 Audi 100V6-2.8LService typePower Steering Pump ReplacementEstimate$811.84Shop/Dealer Price$944.89 - $1328.89
1990 Audi 100L5-2.3LService typePower Steering Pump ReplacementEstimate$1328.38Shop/Dealer Price$1600.64 - $2404.23
1991 Audi 100L5-2.3LService typePower Steering Pump ReplacementEstimate$1328.38Shop/Dealer Price$1600.63 - $2404.22
1993 Audi 100V6-2.8LService typePower Steering Pump ReplacementEstimate$811.84Shop/Dealer Price$950.40 - $1338.52
Show example Audi 100 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Bereketeab

8 years of experience
110 reviews
Bereketeab
8 years of experience
Audi 100 V6-2.8L - Spark Plugs - Sacramento, California
Goes above and beyond, helped save my coil pack when a plug wire was stuck in it. He didn't give up and got it out and finished the job.

Frank

9 years of experience
130 reviews
Frank
9 years of experience
Audi 100 V6-2.8L - Pre-purchase Car Inspection - Chicago, Illinois
Frank was great - kept me informed and performed a solid inspection of a vintage car that I was purchasing 800 miles from home.

Michael

28 years of experience
672 reviews
Michael
28 years of experience
Audi S4 L5-2.2L Turbo - Power Steering Pump - Mesa, Arizona
This was absolutely fantastic! Michael was very knowledgeable and thorough. I would absolutely recommend this service and Michael without a doubt!

Anderson

28 years of experience
94 reviews
Anderson
28 years of experience
Audi A4 Quattro L4-1.8L Turbo - Power Steering Pump - Brooklyn, New York
Very professional very dependable

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Audi Power Steering Pump Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

How to Transfer a Car Title in Nevada
Like Like all other states in the US, Nevada requires that all vehicles have a title that shows who owns a vehicle. When that vehicle is bought, sold, gifted or inherited, ownership changes. Thus, the title must be transferred to...
How to Buy a Personalized License Plate in Nevada
A A personalized license plate (https://www.yourmechanic.com/article/how-to-find-out-which-license-plates-are-available-in-your-state-by-brady-klopfer) is a great way to add a little bit of fun and flair to your car. With a personalized plate, you can make your car uniquely “you,” and use your license plate to say...
2005 Kia Sorento vs. 2005 Chevrolet Blazer: Which One Should I Buy?
SUVs are great for playing out in the mud, taking kids and friends around to different places, as well as just running errands around town. While they are not known to be terrific for gas mileage, that problem is negated...

Loose steering column - 1993 Saab 9000

There are 2 or more bolts which keep the steering column attached to the body structure under the dash. Possibly, these are loose, or worse, might have fallen out. This should be checked by a professional mechanic, like YourMechanic, before...

Car won't shift while it is running - 1995 Honda Civic del Sol

Hi there. The shift rail fork on the shifter is bent. Remove the rubber boot to the shifter and remove the bolts to the shifter to take it off of the transmission. Remove the shifter from the transmission. Check the...

Check engine light and vsa light on in 2009 Honda accord won't accelerate over 20 mph

Hi there. It appears that you have a severe misfire/misfires. The VSC light illuminates when the check engine light is illuminated, by default. When the check engine light flashes, this means that there is what is called a catalyst damaging...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com