Volvo V40 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(24)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(24)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Volvo V40 Power Steering Pressure Hose Replacement is $461 with $307 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Volvo V40L4-1.9L TurboService typePower Steering Pressure Hose ReplacementEstimate$785.32Shop/Dealer Price$942.99 - $1407.07
2001 Volvo V40L4-1.9L TurboService typePower Steering Pressure Hose ReplacementEstimate$851.33Shop/Dealer Price$1026.03 - $1545.60
2003 Volvo V40L4-1.9L TurboService typePower Steering Pressure Hose ReplacementEstimate$775.41Shop/Dealer Price$931.16 - $1393.81
2000 Volvo V40L4-1.9L TurboService typePower Steering Pressure Hose ReplacementEstimate$851.33Shop/Dealer Price$1026.06 - $1545.64
2004 Volvo V40L4-1.9L TurboService typePower Steering Pressure Hose ReplacementEstimate$775.41Shop/Dealer Price$932.78 - $1396.64
Show example Volvo V40 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(24)

Rating Summary
21
2
0
0
1
21
2
0
0
1

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Volvo V40 L4-1.9L Turbo - Brake Caliper Replacement (Passenger Side Front) - Suwanee, Georgia
Knowledgeable, trustworthy, reliable, professional and friendly

Charles

27 years of experience
134 reviews
Charles
27 years of experience
Volvo V40 L4-1.9L Turbo - Brake Pads Replacement (Front) - Seattle, Washington
Charles was a great mechanic. Helped diagnose a tough problem with coolant. Fixed the brakes quickly and competently! Liked the service.

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Volvo V40 L4-1.9L Turbo - Engine Mount - Seattle, Washington
Knowledgeable, thorough, gets the job done! Also punctual.

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Volvo V40 L4-1.9L Turbo - Starter - Irvine, California
As always, Chris did an excellent job.

Excellent Rating

(24)

Rating Summary
21
2
0
0
1
21
2
0
0
1
Number of Volvo V40 services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How Much Does a Mechanic Make in Nevada?
Automotive technician jobs in Nevada have an average mechanic salary of $40k, while the national average is roughly $37k.
P0259 OBD-II Trouble Code: Injection Pump Fuel Metering Control "B"
What What the P0259 code means The powertrain control module (PCM) has recognized a discrepancy in the signal voltage that is supplied to the electronic fuel control actuator and the signal returned from the fuel metering control sensor. Please note...
Illinois Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Illinois. Speed limits in Illinois 70 mph: rural interstates 65 mph: four-lane divided highways 55 mph: most other...

Should I purchase.

Hi there: As the owner of a 2008 BMW 128i convertible with 100,000 miles, I understand some of the benefits of having that type of 'weekend cruiser' in the garage. In general, BMW's have a few common issues that tend...

Will E85 cause damage to my 2013 Ford F250

Hello. E85 can cause some serious damage to your fuel system, especially to the seals in the system. If you flushed the majority of it out and added fresh diesel then you will more than likely be just fine and...

Car shut off

Hi there. What you are describing tends to occur when either an oil line becomes loose or internal engine damage occurs. However, it's also possible that you have an electrical or ignition system component failure that is causing the hard...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com