Volvo V40 Brake pedal is spongy Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(24)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(24)

Brake pedal is spongy Inspection Service

How much does a Brake pedal is spongy Inspection cost?

On average, the cost for a Volvo V40 Brake pedal is spongy Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Volvo V40L4-1.9L TurboService typeBrake pedal is spongy InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2003 Volvo V40L4-1.9L TurboService typeBrake pedal is spongy InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2000 Volvo V40L4-1.9L TurboService typeBrake pedal is spongy InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2001 Volvo V40L4-1.9L TurboService typeBrake pedal is spongy InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2004 Volvo V40L4-1.9L TurboService typeBrake pedal is spongy InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
Show example Volvo V40 Brake pedal is spongy Inspection prices

When you press your brake pedal, it should feel firm and solid. There should be only minimal travel in the pedal before the brakes are engaged, and it should not require significant effort to slow or stop your vehicle. If you’ve noticed your brake pedal feels spongy or soft, there’s a problem with the system that must be identified and repaired immediately.

How this system works:

The “feel” of your brake pedal is created by fluid pressure in the master cylinder and the brake lines. When you press the pedal to slow or stop your car, the master cylinder responds by pushing fluid into the lines that feed the calipers and drums (depending on your vehicle, you may have disc brakes in the front and drums in the rear, or you may have disc brakes on all four wheels).

Once the fluid reaches the calipers, they activate a piston that closes the caliper on the rotor, squeezing it between two brake pads. In the case of drum brakes, an actuator is activated, which pushes the shoes outward against the inner surface of the drum.

In a normally operating system, you should feel little to no difference in the firmness of the brake pedal during any part of operation. However, there are several potential problems that could lead to a spongy or soft pedal feel.

Common reasons for this to happen:

  • Air in the Lines: If air gets into the brake lines, either due to low brake fluid in the master cylinder or from other source, it will create a spongy feel and reduce your stopping ability. This is sometimes a common occurrence after an inexpert brake pad replacement or repair. Air should be bled from the system after every repair to ensure proper operation and safety.

  • Damaged Caliper: Another potential problem that could cause a spongy brake pedal is a damaged brake caliper. If the caliper’s piston seal has started to leak, this will create a soft pedal. Brake fluid may also contaminate the surface of the rotor and/or brake pads, leading to further problems.

  • Master Cylinder Wear: If your master cylinder is older, it can sustain enough wear and tear that it loses fluid pressure. This is generally caused by a fluid leak at the master cylinder. Again, any loss of fluid pressure will lead to a brake pedal that feels spongy or soft.

  • Brake Line Damage: Your vehicle has both rubber and metal brake lines, and either type can be damaged. When this happens, the line may become crimped, which reduces the flow of fluid through it, or it may begin leaking, which will reduce overall pressure. Both conditions lead to a spongy or soft brake pedal.

  • Moisture in Brake Fluid: If your brake fluid hasn’t been changed in a while, there’s a good chance that it has absorbed moisture. Moisture can be absorbed through the pores on rubber brake lines, leading to a spongy or soft brake pedal.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the entire brake system, including the master cylinder, the brake lines, the calipers, rotors and pads. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the entire system, with a particular focus on problems that cause air to be trapped in the lines, or that lead to low fluid levels in the brake system. The mechanic will need to inspect the calipers, the brake lines, the master cylinder and other components in order to determine the actual underlying cause of the problem.

How important is this service?

If you’re experiencing a spongy brake pedal, it’s a critical situation. Air in the lines or low brake fluid can compromise your safety on the road. Your brakes are the single most important safety system on your vehicle, and they must be professionally maintained at all times. One of our mechanics can inspect, diagnose and repair your car to ensure that you’re safe while driving.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(24)

Rating Summary
21
2
0
0
1
21
2
0
0
1

Theodore

16 years of experience
1601 reviews
Theodore
16 years of experience
Volvo V40 L4-1.9L Turbo - Engine Mount - Seattle, Washington
Knowledgeable, thorough, gets the job done! Also punctual.

Theodore

16 years of experience
1601 reviews
Theodore
16 years of experience
Volvo V40 L4-1.9L Turbo - Strut Assembly Replacement (Front) - Kenmore, Washington
Theodore was prepared, and efficient.

Carlos

9 years of experience
6 reviews
Carlos
9 years of experience
Volvo V40 L4-1.9L Turbo - Door Lock Actuator Replacement (Driver Side Front) - Seattle, Washington
Smart guy, prepared, willing to go all the way to get my car fixed! Rain or shine, apparently. Thanks!

Kenneth

16 years of experience
113 reviews
Kenneth
16 years of experience
Volvo V40 L4-1.9L Turbo - Brake Light Bulb Replacement (Driver Side) - Alameda, California
Awesome. On time, sincere, and really helpful. He did more work than I had expected, and taught me a few things to do myself. I have follow up work to do and I will do it with Kenneth.

Excellent Rating

(24)

Rating Summary
21
2
0
0
1
21
2
0
0
1
Number of Volvo V40 services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

Idaho Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Idaho. Speed limits in Idaho Idaho has one of the highest maximum speed limits in the United States,...
P2092 OBD-II Trouble Code: A Camshaft Position Actuator Control Circuit Low Bank 2
What What the P2092 code means? P2092 is an OBD-II generic code for the engine control module (ECM) detecting the A camshaft position actuator control circuit is low on bank 2. What causes the P2092 code? The ECM monitors the...
How to Replace a Door Lock Cylinder
A cylinder lock ensures the proper function of your door locks, which help protect against car theft. Replacing this part takes time and know-how.

Ticking noise coming from engine - 2006 BMW 525xi

The source of the noise must be determined first. The ticking noise may be caused by air in the lifters, this is a common complaint and BMW has a TSB out to address this concern. There is a bleeding procedure...

Brake exhaust doesn't shut off when I press on the accelerator.

Hello and thanks for your question. When you press the accelerator to deactivate the jake brake system, the electronic throttle sends a signal to the computer to shut off the power to the jake brakes for acceleration. The switch inside...

Transmission problems - 1982 Jeep CJ7

Has your clutch been replaced recently? If not, your clutch assembly may be worn out. Check your fluid levels under the hood. At the very least, each reservoir should have fluid in it and you may notice a min/max level...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com