Volvo C40 Recharge Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(1,662)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(1,662)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a Volvo C40 Recharge Car is slow to accelerate Inspection is $146 with $0 for parts and $146 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2024 Volvo C40 RechargeElectricService typeCar is slow to accelerate InspectionEstimate$155.00Shop/Dealer Price$158.60 - $161.30
2023 Volvo C40 RechargeElectricService typeCar is slow to accelerate InspectionEstimate$145.99Shop/Dealer Price$147.82 - $149.20
2022 Volvo C40 RechargeElectricService typeCar is slow to accelerate InspectionEstimate$145.99Shop/Dealer Price$147.85 - $149.24
Show example Volvo C40 Recharge Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(1,662)

Rating Summary
1,556
55
11
7
33
1,556
55
11
7
33

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Volvo XC70 L6-3.2L - Car is slow to accelerate Inspection - Bellevue, Washington
Theodore is very knowledgeable, friendly, explains issue very clearly and even go out of his way to refill the flat tires with no extra charge.

Angel

6 years of experience
237 reviews
Angel
6 years of experience
Volvo S40 L5-2.4L - Car is slow to accelerate - Bowie, Maryland
Excellent service and unprofessionalism. Very friendly guy. I highly reccomend him.

Joseph

21 years of experience
718 reviews
Joseph
21 years of experience
Volvo S40 L5-2.5L Turbo - Transmission fluid is leaking - Salt Lake City, Utah
I've had him work on my car six times now and he's always done a great job.

Chris

17 years of experience
340 reviews
Chris
17 years of experience
Volvo S70 L5-2.4L - Coolant Temperature Switch (Sensor) - San Diego, California
Excellent mechanic. No nonsense and honest. Knew what was wrong and how to fix it and then did just that.

Excellent Rating

(1,662)

Rating Summary
1,556
55
11
7
33
1,556
55
11
7
33
Number of Volvo services completed
18282+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

P2123 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch D Circuit High Input
P2123 P2123 Code Definition Throttle/Pedal Position Sensor/Switch D Circuit High Input What the P2123 code means The P2123 trouble code indicates that the Engine Control Module (ECM), which is in charge of receiving a signal from the throttle position sensor,...
P2765 OBD-II Trouble Code: Input/Turbine Speed Sensor B Circuit
P2765 means the system is receiving a bad or no signal from the input/turbine speed sensor B due to faulty sensors or solenoids or electrical issues.
P0541 OBD-II Trouble Code: Intake Air Heater Relay 1 Low
P0541 means there is a failure on the #1 air intake heater relay circuit, likely due to a faulty wiring connection somewhere in the relay.

At 10 mph, ABS system has clunk noise. 2013 Buick Verano

Hey there, thanks for writing in about your 2013 Buick Verano. The first question is whether or not the ABS light is coming on. If so, then you may want to look into replacing or testing what is called a...

Antifreeze coming out at the base of the oil dipstick tube

That would be unusual so be sure that the antifreeze is not leaking elsewhere and then flowing to that spot. If it is coming out at that point, pull the dipstick to confirm that there is antifreeze in the crankcase....

I want to disable auto lock after 1 min. This just started . THX

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com