Volvo 960 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Volvo 960 Front Crankshaft Seal Replacement is $816 with $480 for parts and $336 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Volvo 960L6-2.9LService typeFront Crankshaft Seal ReplacementEstimate$1556.96Shop/Dealer Price$1833.72 - $2638.08
1994 Volvo 960L6-2.9LService typeFront Crankshaft Seal ReplacementEstimate$1398.95Shop/Dealer Price$1644.70 - $2369.56
1992 Volvo 960L6-2.9LService typeFront Crankshaft Seal ReplacementEstimate$1340.16Shop/Dealer Price$1592.06 - $2337.74
1996 Volvo 960L6-2.9LService typeFront Crankshaft Seal ReplacementEstimate$1528.13Shop/Dealer Price$1799.31 - $2599.49
1993 Volvo 960L6-2.9LService typeFront Crankshaft Seal ReplacementEstimate$1427.75Shop/Dealer Price$1685.19 - $2435.02
1997 Volvo 960L6-2.9LService typeFront Crankshaft Seal ReplacementEstimate$1528.13Shop/Dealer Price$1799.76 - $2600.28
Show example Volvo 960 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0

Daniel

22 years of experience
346 reviews
Daniel
22 years of experience
Volvo 960 L6-2.9L - Ignition Coil - Houston, Texas
Excellent!! Daniel is the best. His years of experience and expertise made my 1996 960 Volvo Sedan run so beautifully again. I highly recommend Daniel if you need an excellent mechanic. The best.

Joe

44 years of experience
838 reviews
Joe
44 years of experience
Volvo 960 L6-2.9L - Exterior Door Handle Replacement (Driver Side Front) - Pinellas Park, Florida
Very efficient and reliable.

Alex

24 years of experience
464 reviews
Alex
24 years of experience
Volvo 960 L6-2.9L - Check Engine Light is on - Garland, Texas
Professional expert mechanic

Lucas

30 years of experience
938 reviews
Lucas
30 years of experience
Volvo 960 L6-2.9L - Brake Pads Replacement (Rear) - North Hollywood, California
Always love working with Lucas.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0
Number of Volvo 960 services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

B1914 OBD-II Trouble Code: Air Bag Crash Sensors 1 and 2 Circuit Short To Ground
B1914 means there is an issue with one or more of the sensors in the air bag system, likely due to a faulty sensor or defective wiring.
P0762 OBD-II Trouble Code: Shift Solenoid C Stuck On
P0762 code means the car’s computer has detected an unusual operation within shift solenoid C often due too low/dirty fluids or poor wire connections.
5 Essential Things to Know About Ridesharing
If If you don’t know the term ridesharing, you’re sure to know the names Uber and Lyft. These companies fall under the ridesharing umbrella, which are also known as TNCs (transportation network companies). While all those ads to become a...

Car misfires

One thing comes to mind with your car. There is a bulletin to solve a problem with fuel injector primary circuit codes. P0351-P0356. This may or may not repair the misfire, but it will prevent the false codes. If this...

Exhaust flex pipe needs replacement

The exhaust flex pipe (https://www.yourmechanic.com/article/how-to-repair-an-exhaust-pipe-by-rocco-lovetere) may be different for different models and time of manufacture of the vehicle. You may have to replace the front exhaust pipe or weld in a new flex pipe. All of them are around 7...

Clutch problems - 2000 Audi A4 Quattro

Hi there. The clutch for your vehicle is a Exedy OEM replacement clutch, Luk clutch, or ACT clutch that needs installed. The name of engines for your vehicle are AEG, AVH, AZG. You can look on the engine, usually on...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com