Volkswagen Tiguan Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(270)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(270)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Volkswagen Tiguan Power Steering Pressure Hose Replacement is $505 with $365 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Volkswagen TiguanL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$961.80Shop/Dealer Price$1167.10 - $1774.90
2009 Volkswagen TiguanL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$876.87Shop/Dealer Price$1061.42 - $1610.96
2010 Volkswagen TiguanL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$876.87Shop/Dealer Price$1061.45 - $1611.00
2015 Volkswagen TiguanL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$952.79Shop/Dealer Price$1156.35 - $1762.84
2014 Volkswagen TiguanL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$952.79Shop/Dealer Price$1157.82 - $1765.42
2016 Volkswagen TiguanL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$952.79Shop/Dealer Price$1156.49 - $1763.09
2011 Volkswagen TiguanL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$876.87Shop/Dealer Price$1061.46 - $1611.03
2017 Volkswagen TiguanL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$952.79Shop/Dealer Price$1156.35 - $1762.84
Show example Volkswagen Tiguan Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(270)

Rating Summary
259
4
0
1
6
259
4
0
1
6

Marko

7 years of experience
24 reviews
Marko
7 years of experience
Volkswagen Tiguan L4-2.0L Turbo - Turn Signal Bulb Replacement (Rear) - Coronado, California
On time, polite and helpful! I will use his auto services again in the future.

Chris

17 years of experience
419 reviews
Chris
17 years of experience
Volkswagen Tiguan L4-2.0L Turbo - Oil Change - San Francisco, California
Thanks you, Chris!!!

Jermaine

25 years of experience
382 reviews
Jermaine
25 years of experience
Volkswagen Tiguan L4-2.0L Turbo - Tune-up - Silver Spring, Maryland
Professional, timely and knows his craft. Great first time experience so far!

James

32 years of experience
705 reviews
James
32 years of experience
Volkswagen Tiguan L4-2.0L Turbo - Water Pump (Auxiliary) - Irvine, California
Showed up right on time and finished the job quickly

Excellent Rating

(270)

Rating Summary
259
4
0
1
6
259
4
0
1
6
Number of Volkswagen Tiguan services completed
2970+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

P0445 OBD-II Trouble Code: Evaporative Emission Control System Purge Control Valve Circuit Shorted
Trouble code P0445 means the evaporative emission control system purge control valve has a problem.
Windshield Laws in New Mexico
If If you drive in New Mexico, you already know there are many different traffic laws you are required to follow. In addition to the rules of the road, however, motorists must also make sure their vehicles are in compliance...
How to Prepare for the New Jersey Driver’s Written Test
Are Are you excited to get out on the road of New Jersey while you are sitting behind the wheel? It’s important to realize that just because you might be old enough to drive, it’s still a privilege and a...

Truck has trouble starting, looks like it's not getting enough gas.

If you have to feather the gas pedal to keep the motor running, this suggests that the fuel pressure may not be maintained at the correct level when starting. The fuel pressure regulator (https://www.yourmechanic.com/services/fuel-pressure-regulator-replacement) is a unit that monitors and...

2005 Ford escape, door ajar issues making alarm go off randomly and lights on even when door is closed

Hi there. Typically when you have an error with a door ajar warning light or the alarm constantly going off, it's caused by an open electrical circuit or a failure of one of the multiple sensors that monitors these systems....

Hi, I have a 2012 Chevy Cruze and the headlights and DIC don't work at all. How do I fix this?

Hi Nain. It's possible that recharging the battery may have damaged an accessory electrical relay or fuse. This is common if the battery charger was not set on a trickle charge or if a jump start - or battery from...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com