Toyota Venza Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(92)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(92)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Toyota Venza Car Thermostat Replacement is $285 with $89 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Toyota VenzaL4-2.7LService typeCar Thermostat ReplacementEstimate$394.32Shop/Dealer Price$443.69 - $580.46
2010 Toyota VenzaL4-2.7LService typeCar Thermostat ReplacementEstimate$381.71Shop/Dealer Price$428.60 - $563.52
2014 Toyota VenzaL4-2.7LService typeCar Thermostat ReplacementEstimate$381.71Shop/Dealer Price$428.64 - $563.58
2012 Toyota VenzaV6-3.5LService typeCar Thermostat ReplacementEstimate$475.04Shop/Dealer Price$524.52 - $664.60
2014 Toyota VenzaV6-3.5LService typeCar Thermostat ReplacementEstimate$469.30Shop/Dealer Price$520.29 - $658.28
2013 Toyota VenzaV6-3.5LService typeCar Thermostat ReplacementEstimate$475.04Shop/Dealer Price$524.80 - $665.09
2011 Toyota VenzaL4-2.7LService typeCar Thermostat ReplacementEstimate$381.71Shop/Dealer Price$428.66 - $563.62
2010 Toyota VenzaV6-3.5LService typeCar Thermostat ReplacementEstimate$475.04Shop/Dealer Price$524.52 - $664.60
Show example Toyota Venza Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(92)

Rating Summary
87
2
1
0
2
87
2
1
0
2

Stephen

33 years of experience
220 reviews
Stephen
33 years of experience
Toyota Venza V6-3.5L - Car is not starting - Denver, Colorado
Very professional and friendly. He fixed my car very quickly.

Paul

24 years of experience
361 reviews
Paul
24 years of experience
Toyota Venza L4-2.7L - Car does not shift from park to drive - Charlotte, North Carolina
Paul is extremely professional, knowledgeable and friendly. He made absolutely sure that he had made the correct diagnosis, explained how had come to it and then made sure that I understood. He was really patient and thorough. He made the experience a pleasant one. Top notch customer service. Top notch guy.

Michael

5 years of experience
355 reviews
Michael
5 years of experience
Toyota Venza V6-3.5L - Oil Cooler Lines - Indianapolis, Indiana
Nice job, got me up and running. A suggestion to any Venza owners, if the engine oil cooler line fails, make sure the part comes from the Toyota dealer. You’ll be sure to get the part that fits.

Nathan

30 years of experience
260 reviews
Nathan
30 years of experience
Toyota Venza L4-2.7L - Oil Change - Tulsa, Oklahoma
Nathan is very friendly and professional. He came to change the oil on my car and finished up even though it was raining like crazy.

Excellent Rating

(92)

Rating Summary
87
2
1
0
2
87
2
1
0
2
Number of Toyota Venza services completed
1012+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

P0355 OBD-II Trouble Code: Ignition Coil B Primary/Secondary Circuit Malfunction
Trouble code P0355 means the PCM has identified an electrical malfunction in the primary or secondary circuit of ignition coil B.
P0407 OBD-II Trouble Code: Exhaust Gas Recirculation Sensor B Circuit Low
P0407 means a problem with the EGR system caused by faulty EGR vacuum solenoid, EGR valve, ground or voltage short in EGR circuit, or bad wiring.
Symptoms of a Bad or Failing Trunk Lock Cylinder
Common signs include the key not going in, lock not turning or feeling stiff, and no resistance when turning the key.

I have rough idle and shaking

The idle air control motor is powered and controlled by the engine computer. You will only get power and ground when the computer wants it to move. If the engine computer is not controlling it, then you may have a...

Electric cooling fan problem after repairing my water pump and thermostat

The water pump and thermostat was replaced for what I can only assume was a leaking water pump. Once this work was done then the mechanic should have run the vehicle until the thermostat opens to completely fill the cooling...

My door will not latch closed. 2003 Ford Taurus

Hi there. It sounds like the latch assembly is freezing up. This commonly occurs in cold weather if the latch is old and if there is any debris built up in the latch. In some cases cleaning it out with...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com