Toyota Sienna Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Toyota Sienna Car Thermostat Replacement is $229 with $89 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Toyota SiennaV6-3.3LService typeCar Thermostat ReplacementEstimate$431.06Shop/Dealer Price$482.59 - $624.20
2017 Toyota SiennaV6-3.5LService typeCar Thermostat ReplacementEstimate$985.28Shop/Dealer Price$1162.27 - $1685.00
2011 Toyota SiennaL4-2.7LService typeCar Thermostat ReplacementEstimate$381.71Shop/Dealer Price$428.64 - $563.58
2000 Toyota SiennaV6-3.0LService typeCar Thermostat ReplacementEstimate$323.41Shop/Dealer Price$369.62 - $504.08
2010 Toyota SiennaV6-3.5LService typeCar Thermostat ReplacementEstimate$382.65Shop/Dealer Price$431.87 - $569.07
2016 Toyota SiennaV6-3.5LService typeCar Thermostat ReplacementEstimate$499.80Shop/Dealer Price$555.75 - $714.61
2018 Toyota SiennaV6-3.5LService typeCar Thermostat ReplacementEstimate$457.75Shop/Dealer Price$523.71 - $715.70
2012 Toyota SiennaL4-2.7LService typeCar Thermostat ReplacementEstimate$381.71Shop/Dealer Price$428.64 - $563.58
Show example Toyota Sienna Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

Fadi

16 years of experience
103 reviews
Fadi
16 years of experience
Sienna 2001 - Thermostat - Chula Vista, CA
Fadi seems very knowledgeable mechanic. He did a thorough job in replacing my thermostat 2001 Toyota Sienna and performed safety inspection.

James

25 years of experience
733 reviews
James
25 years of experience
Sienna 2012 - Thermostat - Tustin, CA
James came early and took care of everything quickly. We ordered rear brake pads and rotors, but he found that our rotors were fine and saved us some money. Tested the car and ran diagnostics afterwards to ensure everything was in working order. Great service.

Jonathan

25 years of experience
42 reviews
Jonathan
25 years of experience
Sienna 2015 - Brake Rotor/Disc - Marietta, GA
He was very friendly and easy to understand where he was coming from with my car. I would recommend him to my friends and use his service again. My brakes are working very well also.

Johnathan

5 years of experience
41 reviews
Johnathan
5 years of experience
Sienna 2019 - Spark Plugs - Chesterfield, MO
Excellent job! Highly professional and knowledgeable.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of Toyota Sienna Car Thermostat Replacement services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

B1924 OBD-II Trouble Code: Air Bag Internal Diagnostic Monitor Fault or System Disarm Fault
B1924 means there is a problem with the air bag system circuit, likely due to a defective electrical component or faulty diagnostic monitor.
Symptoms of a Bad or Failing EVP Position Sensor
Common signs include poor cold start performance, the Check Engine Light coming on, and failing an emissions test.
How to Buy a Good Quality Windshield Washer Pump
You You rely on your windshield washer wipers to clear away all the dirt, slush, grime, rain, and snow. Sometimes a simple wipe isn’t enough, and this is why you turn to your windshield washer pump to provide the cleaning...

How to clear P0443 code?

The purge valve connector should have power from the main relay terminal C on one of the pins of the purge valve with the key on. The other wire goes to the pin 18 of the ECM. If you have...

Fast Ticking sound coming from the engine.

Hi there. To see where the noise is coming from on the engine, first try removing the drive belt and starting the engine. If the ticking noise went away, then there is an issue with a pulley on an accessory...

How much does a tune up cost on a 2008 forrester

Subaru has a specific maintenance schedule, but that schedule includes a long list of items and the mileage and details for each item is quite lengthy. If you have an idea of what you desire from Subaru's schedule, you can...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com