Toyota 86 EGR Temperature Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18,099)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18,099)

EGR Temperature Sensor Replacement Service

How much does a EGR Temperature Sensor Replacement cost?

On average, the cost for a Toyota 86 EGR Temperature Sensor Replacement is $295 with $149 for parts and $146 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Toyota 86H4-2.0LService typeEGR Temperature Sensor ReplacementEstimate$472.55Shop/Dealer Price$542.44 - $762.24
2018 Toyota 86H4-2.0LService typeEGR Temperature Sensor ReplacementEstimate$472.55Shop/Dealer Price$544.46 - $765.77
Show example Toyota 86 EGR Temperature Sensor Replacement prices

What is the EGR Temperature Sensor all about?

Vehicle manufacturers have been required for decades to lower the level of car emissions. One of the earliest methods of pollution control was the exhaust gas recirculation system, which is still in use by nearly all vehicles today. The exhaust gas recirculation (EGR) system re-introduces partially burned exhaust gases into the intake manifold along with the air/fuel mixture to complete its burn before being expelled out the tailpipe and into the atmosphere.

The EGR valve opens and closes to regulate the amount of exhaust to allow into the intake. The EGR temperature sensor is mounted in the EGR tube and measures the temperature of the exhaust gases entering the EGR valve. The engine control module receives the information from the EGR temperature sensor, determines the correct amount of flow through the EGR valve, and adjusts the valve accordingly. If the EGR temperature sensor isn’t reading properly, the EGR valve will not be open in the correct position. It can cause engine knock, which will cause internal engine damage. The Check Engine light can come on with EGR system-related codes and the emissions from the tailpipe will exceed the maximum standards set by your state’s smog/emissions test.

Keep in mind:

  • If the EGR temperature sensor is being replaced, check for proper operation of the EGR valve as well.
  • The EGR temperature sensor is extremely hot while the engine is on. Allow the engine to cool before attempting to inspect or service the temperature sensor.

How it's done:

  • The EGR temperature sensor is verified that it needs to be replaced. The engine top trim cover is removed.

  • The defective EGR temperature sensor is removed by disconnecting the electrical connection and removing the sensor from the EGR base or tube.

  • The new EGR temperature sensor is installed into the EGR tube and the electrical connection is reconnected.

  • The engine is started and the EGR temperature sensor is tested for operation. The engine trim cover is reinstalled.

  • The vehicle is road tested to ensure proper operation of the EGR temperature sensor.

Our recommendation:

The EGR temperature sensor should last the lifetime of your vehicle. It would be advisable to have the EGR system scanned when a smog test is performed, especially if the test fails. If the EGR temperature sensor is reading incorrectly, one of our expert technicians will need to replace it.

What common symptoms indicate you may need to replace the EGR Temperature Sensor?

  • Audible engine knock
  • Check Engine light is on
  • Failed emissions or smog test

How important is this service?

If left unaddressed, the engine knock caused by a faulty EGR temperature sensor will produce internal engine damage which can only be fixed through expensive repairs. You will likely fail a smog test with a faulty EGR temperature sensor. If the EGR temperature sensor fails, have it replaced quickly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(18,099)

Rating Summary
17,047
626
116
76
234
17,047
626
116
76
234

Nazareth

28 years of experience
345 reviews
Nazareth
28 years of experience
Toyota 86 H4-2.0L - Pre-purchase Car Inspection - West Covina, California
Timely, patient, and helpful!

ivan

13 years of experience
19 reviews
ivan
13 years of experience
Toyota Tacoma V6-3.4L - Pre-purchase Car Inspection - Studio City, California
Ivan conducted a pre-purchase inspection of my Tacoma. His report was thorough and he followed up with a phone call. I would highly recommend Ivan! His comments were clear and helpful when factoring in my decision to purchase the vehicle and knowing what I'm getting myself into. He was very punctual, professional, and knowledgeable. 5 stars!

Kyle

14 years of experience
145 reviews
Kyle
14 years of experience
Toyota Corolla L4-1.8L - Oil Change - Dallas, Texas
Excellent. Nice and friendly but very professional at the same time. It had rained that morning and he had to go down in the muck at the parking lot to change the engine oil in my car - but he didn't seem to mind that one bit.

H

27 years of experience
828 reviews
H
27 years of experience
Toyota Camry L4-2.2L - Brake System Inspection - Menlo Park, California
Fair and honest, assured me that the issue was not as bad as I suspected.

Excellent Rating

(18,099)

Rating Summary
17,047
626
116
76
234
17,047
626
116
76
234
Number of Toyota services completed
199089+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

How Are Car Sensors Protected From Heat and Debris?
Reliable car performance depends on sensors to collect and relay data. Some car sensors can be cleaned to make them work reliably again.
P0125 OBD-II Trouble Code: Insufficient Coolant Temperature for Closed Loop Fuel Control
P0125 code definition Insufficient Coolant Temperature For Closed Loop Fuel Control What the P0125 code means P0125 is the OBD-II generic code...
Where Is the O2 Sensor Located?
Oxygen Oxygen sensors O2 sensors (https://www.yourmechanic.com/article/where-is-the-o2-sensor-located) will always be located in the exhaust system. Their function is to sense how much oxygen remains in the exhaust that is flowing out of the engine, and report that information to the vehicle’s...

brake shoe wear uneven

Hi there. Several factors are involved in assessing brake shoe wear. Servo design (lower part of shoes move side to side) and the secondary (rear) brake shoe does most of the work. Non-servo design (lower part of shoes fixed) and...

My car's shifter is stuck in park.

Hi there. The shifter gets the power from the brake light switch as for a safety switch. In order to change gears, the brakes must be applied. Check the power into the brake light switch and the power out of...

Hi, I have a 2014 Chevy Equinox and one windshield wiper works and one does not. Unfortunaley, it is the driver side that doesn't work and I got caught in a bad rain storm the other day.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com