Suzuki XL-7 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(112)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(112)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Suzuki XL-7 Power Steering Pressure Hose Replacement is $370 with $230 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Suzuki XL-7V6-2.7LService typePower Steering Pressure Hose ReplacementEstimate$866.66Shop/Dealer Price$1048.18 - $1584.62
2008 Suzuki XL-7V6-3.6LService typePower Steering Pressure Hose ReplacementEstimate$723.04Shop/Dealer Price$841.41 - $1189.08
2002 Suzuki XL-7V6-2.7LService typePower Steering Pressure Hose ReplacementEstimate$857.65Shop/Dealer Price$1037.42 - $1572.56
2009 Suzuki XL-7V6-3.6LService typePower Steering Pressure Hose ReplacementEstimate$723.04Shop/Dealer Price$841.45 - $1189.15
2003 Suzuki XL-7V6-2.7LService typePower Steering Pressure Hose ReplacementEstimate$857.65Shop/Dealer Price$1038.90 - $1575.14
2007 Suzuki XL-7V6-3.6LService typePower Steering Pressure Hose ReplacementEstimate$723.04Shop/Dealer Price$841.70 - $1189.60
2006 Suzuki XL-7V6-2.7LService typePower Steering Pressure Hose ReplacementEstimate$857.65Shop/Dealer Price$1037.44 - $1572.59
2004 Suzuki XL-7V6-2.7LService typePower Steering Pressure Hose ReplacementEstimate$857.65Shop/Dealer Price$1037.42 - $1572.56
Show example Suzuki XL-7 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(112)

Rating Summary
105
5
0
0
2
105
5
0
0
2

Trey

23 years of experience
153 reviews
Trey
23 years of experience
Suzuki XL-7 V6-3.6L - Car is not starting - Greensboro, North Carolina
Great, informative.

Keith

19 years of experience
406 reviews
Keith
19 years of experience
Suzuki XL-7 V6-2.7L - Battery Light is on - Kissimmee, Florida
Very polite and informative

Terry

32 years of experience
99 reviews
Terry
32 years of experience
Suzuki XL-7 V6-2.7L - Other Inspections - Fort Worth, Texas
Was not able to fix the problem but I was not charged anything. Thanks!

Brent

9 years of experience
87 reviews
Brent
9 years of experience
Suzuki XL-7 V6-3.6L - Electric Problems - Decatur, Georgia
Brent was Very knowledgeable of my type vehicle (Suzuki XL7). He agreed that there indeed was an electrical situation with my vehicle. He performed several key point checks, but got No coded errors. We've agreed to a return visit to make other repairs but we will have to update a few items to find the electrical problem. Problem not resolved as yet, but we're working towards a resolution.

Excellent Rating

(112)

Rating Summary
105
5
0
0
2
105
5
0
0
2
Number of Suzuki XL-7 services completed
1232+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

A Car Collector's Guide to Popular Classic Cars
Classic car collectors buy American muscle cars, elegant European cars, and rare Japanese cars. Buy a classic auto to own a piece of car history.
How to Replace the Parking Brake Cable
A parking brake cable links the control to the brake's mechanical assembly. A working parking brake is needed to keep a car stationary on inclines.
Mississippi Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Mississippi. Speed limits in Mississippi In 2008, Mississippi legislators approved a speed limit of up to 80 mph...

ASR light on dashboard and car runs slow - 1992 Mercedes Benz 500 SEL

You may want to get a second opinion before replacing the entire harness. You could start by first checking and cleaning the mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) of any dirt and oils. The sensor will cause the loss of power...

3100 v6 on 2003 buick century lacks power under acceleration, spits and sputters, hard to get up to speed

If your vehicle is hesitating upon acceleration, it is possible that you have a fuel issue. Some of the potential causes of this issue would include a faulty fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement), faulty fuel pressure regulator (https://www.yourmechanic.com/services/fuel-pressure-regulator-replacement), or a clogged fuel...

08 BMW 328i. DSC Malfunction,Brake lights , Car is shaky,airing notice coming from engine, can't go over 45mpb..any idea?

This is typically related to a speed sensor (https://www.yourmechanic.com/services/speed-sensor-replacement) problem. The reduced speed is due to the engine control module putting the car into reduced power mode as a result of the intermittent signal from the speed sensor. The check...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com