Suzuki Vitara Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Suzuki Vitara Front Crankshaft Seal Replacement is $228 with $32 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Suzuki VitaraV6-2.5LService typeFront Crankshaft Seal ReplacementEstimate$1738.50Shop/Dealer Price$1793.51 - $1871.04
1999 Suzuki VitaraL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1803.35Shop/Dealer Price$2001.14 - $2564.39
1999 Suzuki VitaraL4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$287.57Shop/Dealer Price$310.96 - $375.30
2001 Suzuki VitaraL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1803.35Shop/Dealer Price$2001.31 - $2564.70
2000 Suzuki VitaraL4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$287.57Shop/Dealer Price$313.02 - $378.91
2003 Suzuki VitaraL4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$287.57Shop/Dealer Price$311.16 - $375.64
2002 Suzuki VitaraL4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1557.81Shop/Dealer Price$1694.50 - $2073.82
2002 Suzuki VitaraL4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$287.57Shop/Dealer Price$310.96 - $375.30
Show example Suzuki Vitara Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Adam

18 years of experience
263 reviews
Adam
18 years of experience
Suzuki Vitara L4-2.0L - Radiator - Lake Worth, Florida
Punctual, Personable Experienced mechanic

David

29 years of experience
142 reviews
David
29 years of experience
Suzuki Vitara L4-1.6L - Battery - San Diego, California
Couldn't ask for a better mechanic. Will recommend his services.

Richard

14 years of experience
601 reviews
Richard
14 years of experience
Suzuki Vitara L4-2.0L - Car is not starting - Las Vegas, Nevada
Was friendly and professional took the time to talk about my car and anything it needed will definitely be calling to fix anything in the future. Thank you

Ben

26 years of experience
22 reviews
Ben
26 years of experience
Suzuki Vitara V6-2.5L - Exterior Door Handle Replacement (Driver Side Front) - Norman, Oklahoma
Arrived on time. Was very friendly and completed the work quickly.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Suzuki Vitara services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Brake Pedal Pad
Think Think about how often you use the brakes in your vehicle, probably very often. With that said, over time your brake pedal pad can become worn down and even lose its ridges and traction. The last thing you want...
10 Best Stores to Buy Auto Parts in Raleigh, North Carolina
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Raleigh is Advance Auto Parts.
How to Make Aluminum Wheels Shine
Aluminum Aluminum wheels are an amazing addition to your vehicle to spruce up its appearance. They give your car a sleek, customized look while being relatively low maintenance. Aluminum wheels are desirable in many applications because aluminum is a lightweight...

What do I do when the MAF isn't creating enough ground to the ECM module?

Hi there. First, check the harness connection on the sensor for any burned or corroded pins. That will cause a restriction and make the power drop. If the harness is good on the plug end, then disconnect the harness from...

I have a 2009 Audi Q9 and everytime I drive it it has a strong gas smell. The car does not hesitate to start and no check engine l

Hi there. On modern automobiles, fuel odors should not be detectable at anytime beyond refueling. A strong smell of gasoline can indicate a leaking fuel supply component (fuel filler hose, filter, or lines) or an evaporative emissions component (purge valve,...

Code P1399

Hi There, As you know, this codes relates to a misfire, but is more commonly known to be caused by valves out of adjustment or in some cases clogged EGR valve passages. When the valves are out of adjustment, this...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com