Suzuki Verona Coolant Reservoir Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Coolant Reservoir Replacement Service

How much does a Coolant Reservoir Replacement cost?

On average, the cost for a Suzuki Verona Coolant Reservoir Replacement is $204 with $109 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Suzuki VeronaL6-2.5LService typeCoolant Reservoir ReplacementEstimate$332.39Shop/Dealer Price$396.74 - $567.29
2005 Suzuki VeronaL6-2.5LService typeCoolant Reservoir ReplacementEstimate$312.39Shop/Dealer Price$376.76 - $547.32
2004 Suzuki VeronaL6-2.5LService typeCoolant Reservoir ReplacementEstimate$312.39Shop/Dealer Price$376.76 - $547.32
Show example Suzuki Verona Coolant Reservoir Replacement prices

What is the Coolant Reservoir all about?

Cooling systems on vehicles are meant to remove heat from critical engine components. The fluid or coolant that circulates through the system carries the heat out of the engine to the radiator, where air flow dissipates the heat it contains. A natural reaction to the heat which the fluid experiences is expansion. If the fluid in the cooling system is at the full mark when the engine is cold, the volume will be greater when the fluid is hot due to expansion. Because the cooling system is closed and pressurized when hot, the excess hot coolant needs to go somewhere. It is pushed into a surge tank, or an overflow tank, where it remains until the engine cools down. When the engine cools, the contraction from the fluid still in the system creates a vacuum and the surge tank’s hose draws the coolant back into the system. If the coolant surge tank is cracked or broken, the coolant will leak onto the ground. An airlock will form in the cooling system when the surge tank hose only draws in air instead of coolant.

Keep in mind:

  • Engine coolant is extremely hot when the engine is at operating temperature. Never open the cooling system when the engine is hot.
  • The surge tank should be flushed when the coolant is being changed out.

How it's done:

  • The coolant is drained into a suitable container and the coolant recovery reservoir cap is removed.

  • The old coolant recovery reservoir is disconnected from all of the hoses hoses and pulled free of the vehicle.

  • The new coolant recovery reservoir is installed into the vehicle and secured. The coolant hoses are installed and secured using new clamps.

  • The coolant is refilled and purged of air as per manufacturer recommendation.

  • The vehicle coolant recovery reservoir is checked for leaks and proper operation.

Our recommendation:

The surge tank itself should never need attention unless it is damaged or broken. Excess engine heat may also warp the container, though it is not common. If your coolant surge tank is broken or leaking, have one of our expert mechanics replace it.

What common symptoms indicate you may need to replace the Coolant Reservoir?

  • Coolant leaking onto the ground when engine is hot.
  • Engine overheats due to an airlock.

How important is this service?

The surge tank is part of the cooling system. It may seem to be auxiliary, but it is essential to proper operation. If the surge tank leaks coolant out, an airlock will form in the engine and it could overheat, causing damage. If your surge tank is broken, have it replaced as soon as possible to prevent further issues.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Suzuki Verona L6-2.5L - Engine idle speed is high - Walnut Creek, California
I have nothing but praises for Joshua. He has this incredible ability to troubleshoot issues with cars and armed with knowledge on the subject to his teeth. On top of that, he is also extremely proficient in fixing car issues that do not require troubleshooting. I was so impressed with Josh's sincerity and professionalism that I ended up getting 8 services done in the past month and a half. Of course, for every service, I requested for Josh. When Josh first came to service my car (simple oil change), I was on the verge of getting ready to dispose the car off (a 2004 Suzuki Verona EX, with just 68,000 miles). All thanks to Josh, the car is running better than when it was new (I am serious ... the brand new car had engine trouble and the dealer agreed to replace the engine after a good fight). It is now a pleasure to drive the car and I hope to use it for another 5 years, at least. I strongly recommend Josh to one and all if you ever happen to use YourMechanic.com. For all my car service needs, I will rely on Josh and YourMechanic.com from now on.

Eric

12 years of experience
230 reviews
Eric
12 years of experience
Suzuki Verona L6-2.5L - Valve Cover Gasket - Raleigh, North Carolina
Eric is a very knowledgeable and experienced mechanic. The job, valve cover replacement for my car is one of the difficult ones. It is complicated because many components, electrical connections and hoses had to come off before he could get to the valve cover. He was very patient and meticulous with the job and made sure everything is working fine.

Art

25 years of experience
88 reviews
Art
25 years of experience
Suzuki Verona L6-2.5L - engine coolant temperature sensor - Orlando, Florida
Hi,Iam Ronnie and I'm giving a review from what I seen Art is serious about work meaning he didn't waste any time getting to the problem and fixing the problem.Art have thousands of dollars in tools.There is no job to big for him.He have over 20yrs experience in the work that he have chosen to help other.One other thing when he show up at your place he will be driving a mechanic shop on wheels.Thanks Art!

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Suzuki Verona L6-2.5L - 67,500 Miles Maintenance Service - Walnut Creek, California

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Suzuki Verona services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

How a Keyless Push-Button Ignition Works
Technology Technology has advanced for automotive security and user-focused features, and a shift is occurring where traditional key-and-cylinder starting systems are being replaced by keyless push-button ignition systems. They are incredibly simple to operate and provide excellent security. The system...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when...
How to Replace Oil Cooler Lines on Most Cars
Oil cooler lines fail if there are bends in the hose, low oil levels, or oil visibly puddling underneath the car.

What is the specific torque for the rod bearing of a 2001 Acura 3.2 TL?

Hello, thanks for writing in about your 2001 Acura TL.According to AllData, the specifications are: Connecting Rod Bolt Torque 20 N-m (2.0 kgf-cm, 14 lbf-ft) If you end up needing any help with your vehicle, consider YourMechanic, as one of...

High pitched whining noise on startup

The secondary air injection pump (https://www.yourmechanic.com/services/air-pump-replacement) is well known for making noises such as this on all cars that use them. It only runs when the motor is below a preset temperature. So the longer you let the car sit,...

WHERE IS 2006 KIA SEDONA BACKUP LIGHT SWITCH? BULBS GOOD.

The reverse lights are controlled by the neutral safety switch on the transmission as a computer input to the front control and rear control modules. These modules are accessed by using a scanner to scan for codes and data input...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com