Suzuki Swift Oxygen Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Oxygen Sensor Replacement Service

How much does a Oxygen Sensor Replacement cost?

On average, the cost for a Suzuki Swift Oxygen Sensor Replacement is $169 with $29 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Suzuki SwiftL3-1.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$822.38Shop/Dealer Price$992.83 - $1496.06
1995 Suzuki SwiftL4-1.3LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$499.35Shop/Dealer Price$589.52 - $855.92
1994 Suzuki SwiftL4-1.3LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$203.61Shop/Dealer Price$219.87 - $264.48
1994 Suzuki SwiftL3-1.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$469.35Shop/Dealer Price$552.05 - $795.96
1992 Suzuki SwiftL4-1.6LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$573.71Shop/Dealer Price$683.97 - $1007.26
1994 Suzuki SwiftL4-1.3LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$223.61Shop/Dealer Price$245.01 - $304.73
1993 Suzuki SwiftL4-1.3LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$203.61Shop/Dealer Price$219.89 - $264.51
1991 Suzuki SwiftL4-1.3LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$223.61Shop/Dealer Price$244.87 - $304.48
Show example Suzuki Swift Oxygen Sensor Replacement prices

What is the Oxygen Sensor all about?

With each new model year, manufacturers are adding more oxygen sensors to better manage engine operation. Some high performance engines have an oxygen sensor for each cylinder as well as one for the rear of each catalytic convertor. The sensors are located either underneath the hood or underneath the car. The oxygen sensors are connected (screwed) to the exhaust pipe, either in front or back of the catalytic converter. The front (upstream) sensors measure the amount of oxygen in the exhaust system. The purpose of the front oxygen sensor(s) is to measure how rich or lean the gases are as the gases exit the combustion chamber. Depending upon whether the exhaust gas is lean (high in oxygen content) or rich (low in oxygen content), the amount of fuel entering the engine is adjusted by the engine management computer to try and maintain an ideal mixture that produces the lowest emissions output from the catalytic convertor.

Rear (downstream) sensors are located behind the catalytic converter. The purpose of the rear oxygen sensor(s) is to monitor the oxygen content of the exhaust gases leaving the catalytic convertor.

If one or more of the oxygen sensors are faulty, your car may not pass the emissions test. If you drive your car with a faulty oxygen sensor, you may get poor gas mileage and it can damage the catalytic converter.

Oxygen Sensor-MATROX-1

When replacing the oxygen sensor remember:

  • Many oxygen sensors are damaged by leaking oil or coolant. If that is the case, the cause of that leak needs to be identified and repaired, or else the replacement oxygen sensor will be damaged as well.
  • New vehicles require specific oxygen sensors, and not the universal sensors that were common prior to 1996.

How it's done:

  • Scan the computer in the car for codes.
  • Inspect for vacuum leaks and holes in the exhaust system.
  • Remove and replace the oxygen sensor if it is bad.
  • Check electrical connections.
  • Check for proper operation of oxygen sensors.
  • Clear diagnostic codes.
  • Test drive car.

Our recommendation:

Keep up with the tune-ups. If check engine light is on, don't drive the car too long without getting it inspected. If check engine light is flashing, pull over and get the car towed to avoid costly repairs. Ask the mechanic to inspect the vacuum hoses and leaks in the exhaust system. If the vacuum hose or exhaust system is leaking, it will display an oxygen sensor fault code. Replacing an oxygen sensor may not fix the problem.

What common symptoms indicate you may need to replace the Oxygen Sensor?

  • Check Engine light is on.
  • Car is getting poor gas mileage.
  • Emission test fails.

How important is replacing the oxygen sensor?

Your vehicle has multiple oxygen sensors, and they all help the car run optimally. The front sensors measure how much oxygen is in the exhaust stream to measure how rich or lean the gases leaving the gas chamber are. The rear sensors measure the oxygen content of the gases as they leave the catalytic converter. The oxygen sensors then relay this information to your vehicle’s electronic control unit, so that it can adjust as necessary. Because cars depend on an ideal fuel-to-air ratio to function optimally, the oxygen sensors are leaned on for engine performance. When your oxygen sensors fail your car will run less smoothly, get worse mileage, and have worse emissions.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

William

21 years of experience
129 reviews
William
21 years of experience
Suzuki Swift L4-1.3L - Car is hard to shift - Cape Coral, Florida
Saved me a lot of time and money I would use him again!

Jason

16 years of experience
344 reviews
Jason
16 years of experience
Suzuki XL-7 V6-3.6L - Oxygen Sensor Replacement (Rear/Lower/Downstream) - Arverne, New York
Jason was kind and made sure everything was checked and was a telling me every step...he did a great job.

Dave

50 years of experience
5 reviews
Dave
50 years of experience
Suzuki Grand Vitara V6-2.5L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Mountain View, California

Kiri

21 years of experience
372 reviews
Kiri
21 years of experience
Suzuki Grand Vitara V6-2.7L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Upper Darby, Pennsylvania
Very , very professional and was on time. Did the job fast and neat !

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Suzuki Oxygen Sensor Replacement services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Low Oil Level Sensor
Common signs include inaccurate oil readings, the Oil Light coming on for no reason, the car not starting, and the Check Engine Light coming on.
How Long Does a Speed Timing Sensor Last?
Your Your car’s engine needs a considerable number of sensors in order to operate correctly. Oxygen sensors, the vehicle speed sensor, the mass airflow sensor – these are just a few of them. Your engine also needs a speed timing...
How Long Does an Air Charge Temperature Sensor Last?
The The air charge temperature sensor, also referred to as the intake air temperature sensor, works to monitor the temperature of the air as it enters your car engine. The engine’s computer has to have this information so it can...

Code p0128

Code P0128 (https://www.yourmechanic.com/article/p0033-obd-ii-trouble-code-turbo-charger-or-supercharger-bypass-valve-control-circuit-by-john-nelson) is engaged specifically when the engine itself does not get to operating temperature in a specified time period. The only things that can cause this problem is an issue with the thermostat (https://www.yourmechanic.com/services/thermostat-replacement), head temp sensor, and...

Are there 2 camshaft positioning sensors to replace on this car

You actually have four camshaft sensors. Two on each head and one for each camshaft. There is likely a deeper issue that should be diagnosed. 1208 is "Constant adjustment of intake camshaft or right cylinder bank in direction retarded." 200...

Why would i keep getting p0013 and p0023 codes when the truck isn't equipped with exhaust cams, it's not a 4 cam engine

Hello - this engine, although single overhead camshaft, does use variable cam timing, actuated by "cam torque", rather than engine oil pressure, to adjust exhaust valve timing (relative to the intake valves). This engine was introduced to Ford trucks in...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com