Suzuki Equator Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(14)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Suzuki Equator Car Battery Replacement is $302 with $162 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Suzuki EquatorL4-2.5LService typeCar Battery ReplacementEstimate$478.18Shop/Dealer Price$562.58 - $807.66
2010 Suzuki EquatorL4-2.5LService typeCar Battery ReplacementEstimate$469.17Shop/Dealer Price$551.80 - $795.56
2011 Suzuki EquatorL4-2.5LService typeCar Battery ReplacementEstimate$469.17Shop/Dealer Price$551.82 - $795.60
2011 Suzuki EquatorV6-4.0LService typeCar Battery ReplacementEstimate$469.17Shop/Dealer Price$551.82 - $795.60
2010 Suzuki EquatorV6-4.0LService typeCar Battery ReplacementEstimate$469.17Shop/Dealer Price$553.30 - $798.18
2009 Suzuki EquatorV6-4.0LService typeCar Battery ReplacementEstimate$469.17Shop/Dealer Price$551.96 - $795.85
2012 Suzuki EquatorV6-4.0LService typeCar Battery ReplacementEstimate$469.17Shop/Dealer Price$551.84 - $795.63
2009 Suzuki EquatorL4-2.5LService typeCar Battery ReplacementEstimate$469.17Shop/Dealer Price$551.82 - $795.60
Show example Suzuki Equator Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(14)

Rating Summary
14
0
0
0
0
14
0
0
0
0

Ralph

39 years of experience
207 reviews
Ralph
39 years of experience
Suzuki Equator V6-4.0L - Oil Change - Seattle, Washington
Simple oil change, but "Ralph" treated my vehicle like it was his own. Nice person. Great service.

John

11 years of experience
94 reviews
John
11 years of experience
Suzuki Equator L4-2.5L - Oil Change - Chula Vista, California
Came right on time and did a very thorough job with the truck. This is an awesome service and such an amazing time savings.

Rusty

24 years of experience
567 reviews
Rusty
24 years of experience
Suzuki Equator V6-4.0L - Fuel Pump - Arlington, Texas
He was punctual . Completed the work quickly and was friendly

Erick

11 years of experience
182 reviews
Erick
11 years of experience
Suzuki Forenza L4-2.0L - Battery - Sunnyvale, California
Erick is just wonderful. Peoples you need to listen up. Not only did you fix my battery, he showed me how to do it on my own. He did a point check after he was done, and showed me what needs to be done next and in what order. On top of that, he was personable, friendly and a joy to hang out with.

Excellent Rating

(14)

Rating Summary
14
0
0
0
0
14
0
0
0
0
Number of Suzuki Car Battery Replacement services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Mini Cooper Hardtop
Key Key Features The standard 1.6 liter in-line four cylinder engine offers 121 horsepower at 6,000 rpm. While driving in the city, expect to get around 29 mpg while the driving on the highway will get you around 37 mpg....
Top 10 Hacks for Cleaning and Organizing Your Car
Keeping your car clean and organized makes driving more enjoyable and safer. Use baking soda and household items to maintain a clean car.
P2148 OBD-II Trouble Code: Fuel Injector Group A Supply Voltage Circuit High
What What the P2148 code means? P2148 is an OBD-II generic code for the engine control module (ECM) detecting the fuel injector group A supply voltage circuit has a high resistance causing a short in the system. What causes the...

Catalytic converter bad.

Catalytic converters (https://www.yourmechanic.com/services/catalytic-converter-replacement) do have a federal required warranty that most people are unaware of, talk to your dealer to find out if you are still covered. Early catalytic converter failure can be cause by other factors including coolant contamination...

Pulsating brakes.

Hello. All of the things that you listed could potentially cause the pedal to pulsate. If a wheel hub was recently replaced then I would move on to looking at the other hubs, as well as the rotors and pads....

P2101 code but i just replaced PCM and throttle body im stumped. What else could i do to fix this dreaded red lightening bolt/ limp mode

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com