Subaru Justy Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,559)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,559)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Subaru Justy Throttle Body Replacement is $972 with $832 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Subaru JustyL3-1.2LService typeThrottle Body ReplacementEstimate$1825.20Shop/Dealer Price$2246.35 - $3501.70
1992 Subaru JustyL3-1.2LService typeThrottle Body ReplacementEstimate$1816.19Shop/Dealer Price$2235.57 - $3489.60
1993 Subaru JustyL3-1.2LService typeThrottle Body ReplacementEstimate$1816.19Shop/Dealer Price$2235.60 - $3489.64
1990 Subaru JustyL3-1.2LService typeThrottle Body ReplacementEstimate$1816.19Shop/Dealer Price$2235.60 - $3489.64
1994 Subaru JustyL3-1.2LService typeThrottle Body ReplacementEstimate$1816.19Shop/Dealer Price$2237.07 - $3492.22
1995 Subaru JustyL3-1.2LService typeThrottle Body ReplacementEstimate$1817.23Shop/Dealer Price$2237.04 - $3491.97
Show example Subaru Justy Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(2,559)

Rating Summary
2,439
64
18
10
28
2,439
64
18
10
28

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
Subaru B9 Tribeca H6-3.0L - Loud squealing or squeaking is coming from timing belt - Paterson, New Jersey
excellent person and friendly I liked his good work

Mauricio

41 years of experience
85 reviews
Mauricio
41 years of experience
Subaru B9 Tribeca H6-3.0L - Brake Rotor/Disc Replacement (Front, Rear) - Woodland Hills, California
Mauricio is a real pro! did a great job.

Ben

19 years of experience
114 reviews
Ben
19 years of experience
Subaru B9 Tribeca H6-3.0L - Spark Plugs - Denver, Colorado
Ben showed up on time and did the requested work promptly. I recommend him to all.

Nicholas

22 years of experience
354 reviews
Nicholas
22 years of experience
Subaru Forester H4-2.5L - Oil Change - Parker, Colorado
Late arrival without notice even though the app said on your way. Other than that it went smooth.

Excellent Rating

(2,559)

Rating Summary
2,439
64
18
10
28
2,439
64
18
10
28
Number of Subaru services completed
28149+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
800+
experts on our platform

Recent articles & questions

10 Best Car Top Carriers for Roof Top Cargo & Storage
Storing equipment on the your car roof is a great way to optimize the space in your car. Thule's Sidekick box can carry up to 110 pounds of cargo.
B1951 OBD-II Trouble Code: Seat Rear Up/Down Potentiometer Feedback Circuit Open
B1951 means there is an incomplete or open circuit in the rear seat's potentiometer, possibly due to defective electrical components.
How Long Does a Variable Valve Timing (VVT) Solenoid Last?
One One of the biggest concerns that most people have about their car is how it runs and idles. Most car owners fail to realize just how many different components have to work together in order for this type of...

Why does my 2005 Ford Mustang make a rattling and knocking noise

Hello. Most of the time this is caused by an issue with the timing chain or chain tensioners. The front of the engine would need to be disassembled in order to locate where the noise is coming from. Most of...

What does it mean when I put my car in gear and it won't move and makes loud clicking noise 2006 Chevrolet Malibu

Hello - check the fluid level and quality (should be more pink than black, and not smelled burned). Check also the shifter cable - the inability to re-engage Park (which is a mechanical action) suggests the shifter (https://www.yourmechanic.com/article/3-essential-things-to-know-about-your-car-s-gear-shifter) is no...

Car battery won't hold a charge

The battery should be carefully evaluated in a load test (https://www.yourmechanic.com/services/battery-is-dead-inspection). Batteries are very important. If the battery only has a marginal pass on the load test you should just simply install a new battery (https://www.yourmechanic.com/services/battery-replacement) to reduce diagnostic headaches....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com