Subaru Justy Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(20)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Subaru Justy Power Steering Pump Replacement is $595 with $413 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Subaru JustyL3-1.2LService typePower Steering Pump ReplacementEstimate$1072.88Shop/Dealer Price$1295.41 - $1952.45
1994 Subaru JustyL3-1.2LService typePower Steering Pump ReplacementEstimate$1061.17Shop/Dealer Price$1281.40 - $1936.72
1991 Subaru JustyL3-1.2LService typePower Steering Pump ReplacementEstimate$1061.17Shop/Dealer Price$1281.43 - $1936.78
1993 Subaru JustyL3-1.2LService typePower Steering Pump ReplacementEstimate$1061.17Shop/Dealer Price$1281.43 - $1936.77
1992 Subaru JustyL3-1.2LService typePower Steering Pump ReplacementEstimate$1061.17Shop/Dealer Price$1283.34 - $1940.13
1990 Subaru JustyL3-1.2LService typePower Steering Pump ReplacementEstimate$1061.17Shop/Dealer Price$1281.61 - $1937.09
Show example Subaru Justy Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(20)

Rating Summary
18
1
0
0
1
18
1
0
0
1

Ralph

39 years of experience
207 reviews
Ralph
39 years of experience
Subaru Outback H4-2.5L - Power Steering Pump - Milton, Washington
A very thorough and professional job. Accomplished what I needed done within the estimated timeline with a little time to spare to walk me through further maintenance concerns I had. Very informative and knowledgeable. Thanks again, Ralph!

John

33 years of experience
1126 reviews
John
33 years of experience
Subaru Impreza H4-2.5L - Power Steering Pump - League City, Texas
Great service and I highly recommend!! John was very knowledgeable, quick with the repair, and did a great job keeping me informed on what was going on.

Scott

39 years of experience
607 reviews
Scott
39 years of experience
Subaru Forester H4-2.5L Turbo - Power Steering Pump - Denver, Colorado
Very easy to work with!

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
Subaru Legacy H4-2.5L Turbo - Power Steering Pump - Paramus, New Jersey
It went well. Great guy and no complaints.

Excellent Rating

(20)

Rating Summary
18
1
0
0
1
18
1
0
0
1
Number of Subaru Power Steering Pump Replacement services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
800+
experts on our platform

Recent articles & questions

How to Adjust the Rearview Mirror for Nighttime Driving
We’ve We’ve all been there before. You’re driving down the road at night when a car comes up behind you. Because of some trick in height difference or distance from your rear bumper, it feels like their headlights are glaring...
Symptoms of a Bad or Failing Power Brake Booster
If you notice the brake pedal is difficult to push, causes the engine to stall, or takes longer to stop the car, the power brake booster is failing.
How to Buy a Good Quality Reverse Light Bulb
Reverse Reverse lights are a specific category of tail light that only lights up when you are in reverse or when you step on the brakes. Tail lights are one of the most important safety components that you vehicle has,...

Oil pan gasket and rack and pinion leaking

I would recommend having a knowledgable technician thoroughly inspect the vehicle to determine exactly where the leaks are coming from. (https://www.yourmechanic.com/services/oil-fluid-leak-inspection) A leaking pan gasket would require removal of the oil pan. A leaking rack and pinion will most likely...

New Fuel Pump in June. Gas Gauge didn't work after. November to present will not kick over, sounds like will but won't.

Hello, thank you for writing in. The battery being 4-5 years old is at an age where it may start to fail. When it comes to a no-start situation, this is the first place you want to start. Have the...

Went to change ignition cool and spark plug....:old spark plug is completely missing. Could it have fallen into the cylinder?

If the spark plug has broken and ceramic part of plug fell inside cylinder then you will need to try and remove pieces with a camera and grab fingers or the head will need to be removed. If plug fell...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com