Subaru Justy Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,559)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,559)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Subaru Justy Front Crankshaft Seal Replacement is $664 with $20 for parts and $644 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Subaru JustyL3-1.2LService typeFront Crankshaft Seal ReplacementEstimate$1236.38Shop/Dealer Price$1383.79 - $1788.74
1992 Subaru JustyL3-1.2LService typeFront Crankshaft Seal ReplacementEstimate$1194.93Shop/Dealer Price$1334.21 - $1733.07
1994 Subaru JustyL3-1.2LService typeFront Crankshaft Seal ReplacementEstimate$1194.93Shop/Dealer Price$1334.33 - $1733.28
1990 Subaru JustyL3-1.2LService typeFront Crankshaft Seal ReplacementEstimate$1194.93Shop/Dealer Price$1334.32 - $1733.27
1991 Subaru JustyL3-1.2LService typeFront Crankshaft Seal ReplacementEstimate$1194.93Shop/Dealer Price$1341.10 - $1745.13
1995 Subaru JustyL3-1.2LService typeFront Crankshaft Seal ReplacementEstimate$711.67Shop/Dealer Price$730.90 - $767.88
Show example Subaru Justy Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(2,559)

Rating Summary
2,439
64
18
10
28
2,439
64
18
10
28

Jonathan

23 years of experience
304 reviews
Jonathan
23 years of experience
Subaru Legacy H4-2.5L - Front Crankshaft Seal - Denver, Colorado
He did not give up until the leak stopped. It took two days.

Robert

29 years of experience
3 reviews
Robert
29 years of experience
Subaru Outback H6-3.0L - Front Crankshaft Seal Replacement - Parkville, Maryland
This is a great service, I’m very busy and this was convenient and easy.

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Subaru Outback H4-2.5L - Spark Plugs - Sun City, California
Very professional. Very pleasant. He explain things to me. He was very thorough. I am really happy with him I definitely would recommend him to my friends

Whitney

40 years of experience
783 reviews
Whitney
40 years of experience
Subaru Legacy H4-2.5L - Car is not starting - Mountain View, California

Excellent Rating

(2,559)

Rating Summary
2,439
64
18
10
28
2,439
64
18
10
28
Number of Subaru services completed
28149+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
800+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Strut Assembly
Common signs include knocking noises when driving over bumps, a bumpy ride, floating front end, and uneven tire wear.
P0361 OBD-II Trouble Code: Ignition Coil K Primary / Secondary Circuit Malfunction
Trouble code P0361 means that a malfunction in an ignition coil, often due to an open or short in the driver circuit.
How to Buy a Good Quality Windshield Washer Pump
You You rely on your windshield washer wipers to clear away all the dirt, slush, grime, rain, and snow. Sometimes a simple wipe isn’t enough, and this is why you turn to your windshield washer pump to provide the cleaning...

How to replace all of my ignition coils?

I can only assume, since you did not note the vehicle, year, make, or model. Every vehicle I have done did not have a different coil for each cylinder and it doesn't matter since all of them are the same...

I just replaced the rear [struts](/topics-strut/) on my 98 [camry](/topics-camry/), they were monroe quick struts and I replaced them with the same, the old ones were around 8 years old and the suspension needed replacing, i just finished installing everything, i torqued everything to proper spec except the upper mount inside the car, can't get a torque wrench in there because its so tight and can't use a socket to tighten, had to use a combination wrench but I did get them tight, originally after installing before driving I heard squeaks when depressing the suspension but I wasn't so worried about that because they're brand new and haven't been depressed before, now after driving around the neighborhood with windows open listening for sounds I strained to hear anything but there wasn't anything over the sound of the car. After parking I hear a clunking sound after depressing one side of the car. I also replaced the stabilizer end links and the stabilizer bushings, the end links were really difficult to tighten, especially with a torque wrench but theyre at least at 25 ft/lbs which is the spec I found online, kind of concerned about that as well because I found a one off quote for the spec at 60 ft/lbs which I don't think is likely to be correct because in order to tighten you've got to grab this tiny round bolt housing on the ball joint in order to tighten and the tighter you want to get the tighter you need to squeeze on the round housing. Finally I'm a little concerned the stabilizer bar isn't centered, i mean it seems that way and it was difficult to get the clips around the new bushing back on, as in they really only fit one way and it was tough getting them threaded in the first place without a bunch of adjustment. I'm wondering what that clunking sound is, how to diagnose it, how to fix it, and anything else that could be an issue after the replacement.

Someone put a Tracker tracker device in my car where can I find it

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com