Subaru Baja Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Subaru Baja Power Steering Pump Replacement is $481 with $299 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Subaru BajaH4-2.5LService typePower Steering Pump ReplacementEstimate$798.62Shop/Dealer Price$952.58 - $1403.93
2005 Subaru BajaH4-2.5LService typePower Steering Pump ReplacementEstimate$786.91Shop/Dealer Price$938.57 - $1388.20
2003 Subaru BajaH4-2.5LService typePower Steering Pump ReplacementEstimate$786.91Shop/Dealer Price$938.60 - $1388.26
2004 Subaru BajaH4-2.5L TurboService typePower Steering Pump ReplacementEstimate$1257.31Shop/Dealer Price$1526.60 - $2329.05
2005 Subaru BajaH4-2.5L TurboService typePower Steering Pump ReplacementEstimate$1257.31Shop/Dealer Price$1528.52 - $2332.41
2006 Subaru BajaH4-2.5LService typePower Steering Pump ReplacementEstimate$786.91Shop/Dealer Price$938.78 - $1388.57
2006 Subaru BajaH4-2.5L TurboService typePower Steering Pump ReplacementEstimate$1257.31Shop/Dealer Price$1526.62 - $2329.09
Show example Subaru Baja Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(18)

Rating Summary
16
1
0
1
0
16
1
0
1
0

Ryan

13 years of experience
47 reviews
Ryan
13 years of experience
Subaru Baja H4-2.5L - Oil Change - San Diego, California
Very knowledgeable! Answered questions and was very friendly! Did the job quickly and efficiently!

Hugh

12 years of experience
159 reviews
Hugh
12 years of experience
Subaru Baja H4-2.5L - Oil Change - Colorado Springs, Colorado
It was fine.

Chet

42 years of experience
509 reviews
Chet
42 years of experience
Subaru Baja H4-2.5L - Brake Pads Replacement (Front, Rear) - San Diego, California
We always ask for Chet when we have to service one of our cars. He is very knowledgeable, thorough and personable.

Chet

42 years of experience
509 reviews
Chet
42 years of experience
Subaru Baja H4-2.5L - Evaporation Vent Solenoid - San Diego, California
Chet was great, as usual. He always gives us exactly what we need, advises on future needs and doesn't try to sell us unnecessary service.

Excellent Rating

(18)

Rating Summary
16
1
0
1
0
16
1
0
1
0
Number of Subaru Baja services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
800+
experts on our platform

Recent articles & questions

P2423 OBD-II Trouble Code: HC Adsorption Catalyst Efficiency Below Threshold Bank 1
P2423 P2423 Code Definition A P2423 code is a generic powertrain code related to emissions systems problems. In this case, the hydrocarbon adsorption and catalyst efficiency is below the allowed threshold in engine bank 1 (typically the number 1 cylinder)....
How to Become an Uber Driver
Uber is a ridesharing service that operates in 500 cities. To apply to be an Uber driver, download the Uber app and have your car inspected.
P0082 OBD-II Trouble Code: Intake Valve Control Solenoid Circuit Low (Bank 2)
P0082 P0082 trouble code definition P0082 indicates a fault within the intake valve control solenoid circuit. It may be seen with P0081. The car may have a bank 1 and bank 2 solenoids What the P0082 code means P0082 is...

all the tranmission fluid burned out, dip stick was black, burning smell. new tranmission installed, a line was punctured on insta

Have the vehicle checked after filling the transmission. You should not let the fluid get low on the new transmission. You may need to have the vehicle run on a lift to see where the leak is. If you need...

The coolant hose between the radiator and engine is kinked. I think its either the thermostat or the water pump. Please advise how

You will need to replace the kinked hose to restore flow to the engine. This is the bypass hose so coolant flows through the engine before thermostat opens.

Pulled out ignition fuse and put back, now Lexus isf won't turn over.

Removing the fuse while the circuit was powered might have caused the fuse to open. Both fuses should be tested for continuity. If the fuses are intact and they are securely installed but the car won't start, there's a possibility...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com