Scion xA Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(105)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(105)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Scion xA Car Thermostat Replacement is $233 with $93 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Scion xAL4-1.5LService typeCar Thermostat ReplacementEstimate$341.16Shop/Dealer Price$391.30 - $533.62
2005 Scion xAL4-1.5LService typeCar Thermostat ReplacementEstimate$332.15Shop/Dealer Price$380.52 - $521.52
2006 Scion xAL4-1.5LService typeCar Thermostat ReplacementEstimate$332.15Shop/Dealer Price$380.55 - $521.56
Show example Scion xA Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Scion mechanics

Real customer reviews from Scion owners like you.

Excellent Rating

(105)

Rating Summary
99
3
3
0
0
99
3
3
0
0

Mark

12 years of experience
349 reviews
Mark
12 years of experience
Scion xA L4-1.5L - power steering belt - Palo Alto, California

Brandon

19 years of experience
275 reviews
Brandon
19 years of experience
Scion xA L4-1.5L - Loud squealing or rattling is coming from engine - Lithonia, Georgia
He is the first mechanic that arrived better than schedule.

Peter

29 years of experience
592 reviews
Peter
29 years of experience
Scion xA L4-1.5L - AC is not working Inspection - West Hills, California
Peter has an awesome personality. Very knowledgeable and friendly. Definitely no BS from him. Very honest.... Will I use him again? Definitely. Will I refer him? Absolutely! Thank you Peter!

John

37 years of experience
565 reviews
John
37 years of experience
Scion xA L4-1.5L - Oil Change - Pacifica, California
He is friendly kind knowledgeable and timely

Excellent Rating

(105)

Rating Summary
99
3
3
0
0
99
3
3
0
0
Number of Scion xA services completed
1155+
services done by our mechanics
TOTAL NUMBER OF EXPERT Scion MECHANICS
500+
experts on our platform

Recent articles & questions

Louisiana Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Louisiana. Speed limits in Louisiana 75 mph: along 154 miles of Interstate 49 70 mph: as posted along...
Symptoms of a Bad or Failing Timing Belt
Common signs include a ticking noise coming from the engine, an engine that won't turn over, engine misfires, and oil leaking in front of the motor.
P0907 OBD-II Trouble Code: Gate Select Position Circuit High
P0907 code means there is an issue within the vehicle's transmission gate select position circuit often due too wiring or rarely, the PCM.

Car pulls to left when braking

A car that pulls to one direction when applying the brakes is a sign of a sticking brake caliper or a failing brake caliper. For your Acura, you are on the right track to suspect a collapsed brake line or...

After jump-starting, warning lights came on

If you are having random electrical problems that don't seem to be related to the car not starting, it is likely that you have an alternator failure (https://www.yourmechanic.com/services/alternator-replacement) with your Mercedes E500. When an alternator fails, it can cause all...

How to remove the climate control switch assembly?

Hi there. The switch cluster is located within the dash in a combination with the radio. The surrounding plastic case that holds the switch in place is held in by plastic tabs. Gently pop out the plastic tabs from the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com