Scion tC Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(22)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(22)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Scion tC Car Battery Replacement is $296 with $156 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Scion tCL4-2.5LService typeCar Battery ReplacementEstimate$478.18Shop/Dealer Price$562.58 - $807.66
2013 Scion tCL4-2.5LService typeCar Battery ReplacementEstimate$469.17Shop/Dealer Price$551.80 - $795.56
2006 Scion tCL4-2.4LService typeCar Battery ReplacementEstimate$457.55Shop/Dealer Price$537.30 - $772.36
2015 Scion tCL4-2.5LService typeCar Battery ReplacementEstimate$469.17Shop/Dealer Price$551.82 - $795.60
2005 Scion tCL4-2.4LService typeCar Battery ReplacementEstimate$457.55Shop/Dealer Price$538.77 - $774.94
2016 Scion tCL4-2.5LService typeCar Battery ReplacementEstimate$469.17Shop/Dealer Price$551.96 - $795.85
2008 Scion tCL4-2.4LService typeCar Battery ReplacementEstimate$457.55Shop/Dealer Price$537.31 - $772.39
2007 Scion tCL4-2.4LService typeCar Battery ReplacementEstimate$457.55Shop/Dealer Price$537.30 - $772.36
Show example Scion tC Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Scion mechanics

Real customer reviews from Scion owners like you.

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0

Mark

5 years of experience
38 reviews
Mark
5 years of experience
tC 2010 - Battery - Orlando, FL
Communicates well, letting you know all the necessary details, friendly and competent.

Eric

10 years of experience
164 reviews
Eric
10 years of experience
tC 2006 - Battery - Washington, DC
Great!

Greg

21 years of experience
112 reviews
Greg
21 years of experience
tC 2010 - Brake Pads - Peoria, AZ
Goes above and beyond to satisfy the customer and then some!

Greg

21 years of experience
112 reviews
Greg
21 years of experience
tC 2010 - Electric Problems - Peoria, AZ
Goes above and beyond to satisfy the customer and then some!

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0
Number of Scion tC Car Battery Replacement services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT Scion MECHANICS
500+
experts on our platform

Recent articles & questions

P2535 OBD-II Trouble Code: Ignition Switch Run/Start Position Circuit High
P2535 code means the voltage to your vehicle’s fuel delivery and ignition systems is low due to burned fuses, links, or wiring or bad alternator.
Connecticut Parking Laws and Colored Pavement Markings
While While there are certainly plenty of rules and laws to remember when you are behind the wheel and on the road in Connecticut, you also have to keep in mind the parking laws, as well as the colored pavement...
P0328 OBD-II Trouble Code: Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)
P0328 code definition P0328 is a general OBD2 diagnostic trouble code pointing to a fault within the knock sensor 1 circuit. What...

Center console compartment

How do I use the center console compartment? A212. The center console compartment is located between the two front seats, and offers extra storage space. To open the center console compartment, simply lift the lid up.

1999 Honda CR-V door not opening from inside

Door handles on cars are connected to metal rods that actuate the latch causing the door to open. It is possible that one of the rods has become disconnected from the interior door handle causing it not to work. It...

My car wont stay on

This may be related to a dirty or failing idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement). The idle air control valve monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com