Saturn SC1 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(26)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(26)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Saturn SC1 Wheel Bearings Replacement is $259 with $119 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Saturn SC1L4-1.9LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$393.66Shop/Dealer Price$456.93 - $638.62
1997 Saturn SC1L4-1.9LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$384.65Shop/Dealer Price$446.15 - $626.52
1996 Saturn SC1L4-1.9LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$384.65Shop/Dealer Price$446.17 - $626.56
1997 Saturn SC1L4-1.9LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$384.65Shop/Dealer Price$446.17 - $626.56
2002 Saturn SC1L4-1.9LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$384.65Shop/Dealer Price$447.65 - $629.14
1998 Saturn SC1L4-1.9LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$384.65Shop/Dealer Price$446.31 - $626.81
1994 Saturn SC1L4-1.9LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$384.65Shop/Dealer Price$446.19 - $626.59
1998 Saturn SC1L4-1.9LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$384.65Shop/Dealer Price$446.17 - $626.56
Show example Saturn SC1 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(26)

Rating Summary
24
1
0
0
1
24
1
0
0
1

Joseph

34 years of experience
540 reviews
Joseph
34 years of experience
Saturn SC1 L4-1.9L - Starter - Frisco, Texas
This was my first time using a 'mobile' service. I needed a new starter and had not driven my car in over a month. I got a message when Joseph started on his way out to us. Another message when he had arrived. The timing was great. I explained the situation with my car, dead battery, bad starter, can't run. Joseph said 'I'll fix it'. An hour later it was ready, running, without any problems. The whole experience was great! I've got his business cards to give to my three children. Cost was better than anywhere I checked. I trust Joseph and won't hesitate to call him again. Anyone looking for a pro in car care, I recommend Joseph. For sure!!

David

12 years of experience
225 reviews
David
12 years of experience
Saturn SC1 L4-1.9L - Car Starter Repair - Kansas City, Missouri
On time and friendly! Got it done!

Casey

25 years of experience
152 reviews
Casey
25 years of experience
Saturn SC1 L4-1.9L - Oil Change - Bellevue, Washington
would request him befor anyone else 1st

Brandon

21 years of experience
773 reviews
Brandon
21 years of experience
Saturn SC1 L4-1.9L - Coolant is leaking - Loughman, Florida
fast, simple, great service

Excellent Rating

(26)

Rating Summary
24
1
0
0
1
24
1
0
0
1
Number of Saturn SC1 services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

10 Best Online Automotive Certification Programs
Automotive technician jobs require automotive certification. Penn Foster is an online automotive school that prepares mechanics for ASE certification.
Symptoms of Bad or Failing Glow Plugs
Common signs in diesel vehicles include engine misfires, issues starting in the cold, and more smoke coming out of the exhaust.
How Long Do Wheel Bearings Last?
Most Most people take for granted all of the systems that have to work together in order for their car to run. Making a car mobile is a lot harder than most people think. The power that the engine produces...

Strong smell in the car - 2003 Volkswagen Beetle

Hello. To get rid of a smell I would try to pinpoint where it's coming from and focus on cleaning or deodorizing that area. If the smell is coming from the outside then washing the vehicle a few times will...

Battery is dying, even after a jump start.

As you know the alternator (https://www.yourmechanic.com/services/alternator-replacement) is responsible for charging the battery and when not working properly will cause the battery to die prematurely. This may also be potentially related to the voltage regulator not working properly. This is a...

New battery drained of power in one week

If the battery is new and charging system output has been measured and is within specifications, the only reason a battery will discharge is if the car sits for a long period of time (batteries will self-discharge even if not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com