Saturn LS2 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Saturn LS2 Brake Pad Replacement is $249 with $81 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LS2V6-3.0LService typeBrake Pads - Front ReplacementEstimate$347.12Shop/Dealer Price$391.72 - $515.80
2000 Saturn LS2V6-3.0LService typeBrake Pads - Rear ReplacementEstimate$336.31Shop/Dealer Price$378.79 - $501.28
Show example Saturn LS2 Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(13)

Rating Summary
10
3
0
0
0
10
3
0
0
0

Whitney

40 years of experience
783 reviews
Whitney
40 years of experience
Saturn LS2 V6-3.0L - Oil or Fluid is leaking - San Jose, California
Whitney Ortiz was courteous and knowledgeable about our problems with an automobile. We intend to use his services for other vehicles that we drive. We were pleased with his work and comfortable with the costs. It is a great service for a mechanic to come out to a residence to repair a vehicle and to get it up and running!

Melvin

18 years of experience
221 reviews
Melvin
18 years of experience
Saturn LS2 V6-3.0L - Oil/Fluid Leak - Atlanta, Georgia
Mr. Lee was punctual, called before arrival, did a thorough check of the vehicle. Told me what the problem was and what it took to repair it. Personable young man.

Pete

17 years of experience
192 reviews
Pete
17 years of experience
Saturn LS2 V6-3.0L - Oil Change - El Cajon, California
Knows his stuff and most importantly, he's honest. On time and no messing around.

Caster

29 years of experience
176 reviews
Caster
29 years of experience
Saturn LS2 V6-3.0L - AC Compressor - Petaluma, California
Caster was on time and worked hard to replace the AC Compressor. He provided updates and kept me informed.

Excellent Rating

(13)

Rating Summary
10
3
0
0
0
10
3
0
0
0
Number of Saturn LS2 services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

How to Renew Your Car Registration in South Dakota
Most Most people forget that driving on the roadways of South Dakota is a privilege. There are a variety of things that have to be done to these roadways to keep them in good shape. Paying the fees to register...
3 Reasons Your Car Smells like Rotten Eggs
A sulfuric or rotten eggs smell indicates an excess of byproducts left over from failed combustion. Removing the smell requires part replacement.
How To Use Hazard Lights
Your Your car is equipped with a number of different lights. Depending on the light in question, they serve purposes ranging from visibility to directionality to safety to convenience. Where do your hazard lights fit into that? Actually, it’s a...

Do you have to remove the transmission on a vacuum pump replacement for 2010 VW Jetta?

The by-the-book way of replacing the brake booster vacuum pump (https://www.yourmechanic.com/services/vacuum-pump-replacement) involves removing the transmission in order to have enough room to do the repair properly, but some experienced technicians can complete the job without removing the transmission. This repair...

Cold Starting Problems

As a general rule, car engines do not like cold weather and do not do operate as well in cold weather. When you start your car in the morning and turn the key to on, the coolant temperature sensor immediately...

Brakes locked up while car is off and parked.

Hello. As long as your vehicle is in park you should be able to start your car safely without having to worry about using the braking system just yet. I recommend that you start the car up and see if...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com