Saturn L100 Serpentine/Drive Belt Replacement Costs

Car	Service	Estimate	Shop/Dealer Price
2001 Saturn L100L4-2.2L	Service typeSerpentine/Drive Belt Replacement	Estimate$222.88	Shop/Dealer Price$243.45 - $297.06
2002 Saturn L100L4-2.2L	Service typeSerpentine/Drive Belt Replacement	Estimate$213.87	Shop/Dealer Price$232.67 - $284.96

Car

Service

Estimate

Shop/Dealer Price

2001 Saturn L100L4-2.2L

Service typeSerpentine/Drive Belt Replacement

Estimate$222.88

Shop/Dealer Price$243.45 - $297.06

2002 Saturn L100L4-2.2L

Service typeSerpentine/Drive Belt Replacement

Estimate$213.87

Shop/Dealer Price$232.67 - $284.96

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

When to consider replacing the serpentine belt:

Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(6)

Rating Summary

SEE REVIEWS NEAR ME

David

14 years of experience

463 reviews

Request David

by Rossini

Saturn L100 L4-2.2L - Noise from engine or exhaust - Kennesaw, Georgia

David is a very competent and friendly professional. He arrived on time. He answered all of the questions that I proposed. David completed a thorough diagnosis of our engine problems and did a 50 point inspection of the vehicle. I am extremely impressed with David and the platform of "Your Mechanic" . I highly reccommend David and "Your Mechanic".

Manuel

33 years of experience

590 reviews

Request Manuel

by Michael

Saturn L100 L4-2.2L - Tie Rod End Replacement (Front Left Outer, Front Right Outer) - Mission Viejo, California

Manuel is always on time and professional. He does honest, quality work in a timely manner. He will also let you know if something else needs to be looked into. Highly recommended.

Jeff

34 years of experience

441 reviews

Request Jeff

by ken

Saturn L100 L4-2.2L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Sacramento, California

Jeff was on time, did a great job and finished earlier than expected. This guy comes with a big van with every tool on the planet. I will be calling Your Mechanic in future. Thanks for an excellent job at a very reasonable price.

Ian

16 years of experience

133 reviews

Request Ian

by Mike

Saturn L100 L4-2.2L - Cooling System Flush - Edmonds, Washington

Ian showed up early, which was great, (beat the rain). He was very nice, asked if I had any concerns or issues. I told him why I had him come out and he suggested a quick test. Everything was fine, he did the flush. He did an inspection. All looked good. I would recommend Ian to anyone needing service. It's really nice to be able to actually talk with the mechanic instead of just somebody behind a desk. I plan to call Ian for future work if/when needed. Thank You Ian!

Saturn L100 Serpentine/Drive Belt Replacement at your home or office.

Estimate price near me

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Saturn L100 Serpentine/Drive Belt Replacement is $174 with $34 for parts and $140 for labor. Prices may vary depending on your location.

What is a serpentine belt and how does it work?

When to consider replacing the serpentine belt:

How do mechanics replace the serpentine belt?

Is it safe to drive with a serpentine belt problem?

When replacing the serpentine belt keep in mind:

Meet some of our expert Saturn mechanics

Excellent Rating

Rating Summary

David

Manuel

Jeff

Ian

Excellent Rating

Rating Summary

Recent articles & questions

Carburetor issues

I drove with the emergency brakes on. What went wrong?

my car will not start after putting fuel in the tank, what could be the reason for this happening? 2006 Kia Rio 5

How can we help?