Saturn L100 Air filter is clogged Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)

Air filter is clogged Inspection Service

How much does a Air filter is clogged Inspection cost?

On average, the cost for a Saturn L100 Air filter is clogged Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Saturn L100L4-2.2LService typeAir filter is clogged InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2001 Saturn L100L4-2.2LService typeAir filter is clogged InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Saturn L100 Air filter is clogged Inspection prices

When an air filter becomes dirty, it can have a dramatic effect on performance and the engine may run rough. When the air filter becomes clogged, these problems can become even worse and your vehicle may stop running altogether. When an engine does not get enough clean air it may run “rich,” which means that the engine is receiving too much gasoline and not enough air. Engines that run rich struggle to maintain power, which can be very noticeable when driving.

How this system works:

Your vehicle’s air filter keeps dirt and other contaminants from entering the engine and potentially damaging critical components. Air filters need to be replaced every 10,000 to 15,000 miles, though vehicles in areas of high congestion may need to have their air filters changed more frequently. Most modern vehicles have rectangular filters fitted inside a plastic case in the engine compartment. Older, carbureted engines typically have a circular filter placed above the carburetor. Automotive air filters are made from either paper, foam, or cotton, each with its own set of advantages and disadvantages relative to the cost and filtering ability.

Common reasons for this to happen:

  • Air filters are dirty: Air filters will get dirty and become less effective over time. As more dust and other particles are collected, the filter will struggle to maintain good airflow to the engine. In areas where smog is prevalent, or where there is a lot of traffic congestion, air filters may get dirtier more quickly.

If a dirty air filter is not replaced, it can become clogged. A clogged air filter severely limits the amount of air making it to the engine. A clogged air filter may fail, allowing dirt and other contaminants into the engine. This will result in extremely poor performance, and may cause permanent damage to the engine.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the extent of the damage done by the clogged filter and provide a replacement. The mechanic will then provide a detailed inspection report outlining if any damage has been done by the clogged filter, and the cost of any repairs that need to be made.

How it's done:

A mechanic will first remove the air filter from its compartment in the engine bay to determine the extent of the clog and if there is any damage to other engine components. The mechanic should then provide a replacement filter and make sure that it fits well. A poorly fitting, or incorrect filter may allow large particles or other contaminants into the engine. When the new filter is installed, the mechanic should replace the cover and make sure that the filter is sealed well. When the replacement is complete, the mechanic should have you start the engine to check how it runs. If the engine struggles to run well after the new filter is installed, the mechanic may have to investigate if further damage has been done to the engine by the clogged filter. The mechanic will make sure that all necessary repairs have been made and the engine is running well before he or she leaves.

How important is this service?

A poorly running engine, or a vehicle that seems to be down on power may be suffering from a clogged air filter. A clogged air filter will only get worse over time and may cause further damage to the vehicle if it is not replaced. It is important to have your vehicle’s air filter replaced every 10,000 to 15,000 miles, or more often depending on if you live in an area with higher congestion. Your mechanic should help you determine how often your vehicle’s air filter should be replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(6)

Rating Summary
5
0
1
0
0
5
0
1
0
0

Ian

15 years of experience
133 reviews
Ian
15 years of experience
Saturn L100 L4-2.2L - Cooling System Flush - Edmonds, Washington
Ian showed up early, which was great, (beat the rain). He was very nice, asked if I had any concerns or issues. I told him why I had him come out and he suggested a quick test. Everything was fine, he did the flush. He did an inspection. All looked good. I would recommend Ian to anyone needing service. It's really nice to be able to actually talk with the mechanic instead of just somebody behind a desk. I plan to call Ian for future work if/when needed. Thank You Ian!

Manuel

32 years of experience
581 reviews
Manuel
32 years of experience
Saturn L100 L4-2.2L - Tie Rod End Replacement (Front Left Outer, Front Right Outer) - Mission Viejo, California
Manuel is always on time and professional. He does honest, quality work in a timely manner. He will also let you know if something else needs to be looked into. Highly recommended.

Manuel

32 years of experience
581 reviews
Manuel
32 years of experience
Saturn L100 L4-2.2L - Brake Drum - Mission Viejo, California
Very pleased with the service and ease of use. Manuel was on time and pleasant to work with. He kept me informed throughout the process and showed me what would be replaced with new parts. After test driving the vehicle, he recommended future service. I would definitely recommend him to anyone.

Jeff

33 years of experience
441 reviews
Jeff
33 years of experience
Saturn L100 L4-2.2L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Sacramento, California
Jeff was on time, did a great job and finished earlier than expected. This guy comes with a big van with every tool on the planet. I will be calling Your Mechanic in future. Thanks for an excellent job at a very reasonable price.

Excellent Rating

(6)

Rating Summary
5
0
1
0
0
5
0
1
0
0
Number of Saturn L100 services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

P0308 OBD-II Trouble Code: Cylinder 8 Misfire Detected
P0308 Code Definition Cylinder 8 Misfire Detected What the P0308 code means The P0308 trouble code means that the powertrain control module...
How Much Does a Mechanic Make in Kansas?
Automotive technician jobs in Kansas have an mean salary of $38k, with some mechanics earning as much as $40k.
How to Replace a Rearview Mirror
A rearview mirror is failing when it is cracked, the dimming function is not working or the mirror is discolored. Replace the mirror if it is missing.

Feels like front right tire has vibration when turning left or merging lanes to the left at highway speed only. Bearings are okay

Hello, thanks for writing in. If the bearings are fine then the tires need to be checked first (https://www.yourmechanic.com/services/uneven-tire-wear-inspection). If there is any uneven wear then this will occur. If the tires are all fine then the hubs need to...

When I speed up my service engine light flashes.

Hi there. If you engine is having a P0300 (https://www.yourmechanic.com/article/p0300-obd-ii-trouble-code-random-multiple-cylinder-misfire-detected-by-jamahl-walker) code for a random misfire, check the camshaft position sensor for any moisture and if the harness has any broken wires. If the sensor looks to be good, then remove...

Hi, i have a problem wirhy my vw Polo clp engine, ir keeps on bending valves althoufh the timing is set right. First they suspect the chain, now m being told to buy the whole timing kit cos the chain keeps a on getting loose

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com