Saab 9-3 Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(240)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(240)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Saab 9-3 Brake Master Cylinder Replacement is $312 with $172 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saab 9-3L4-2.3L TurboService typeBrake Master Cylinder ReplacementEstimate$1000.42Shop/Dealer Price$1215.38 - $1852.14
2011 Saab 9-3L4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$784.81Shop/Dealer Price$946.35 - $1426.84
2004 Saab 9-3L4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$784.81Shop/Dealer Price$946.37 - $1426.88
1999 Saab 9-3L4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$991.41Shop/Dealer Price$1204.62 - $1840.08
2008 Saab 9-3L4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$784.81Shop/Dealer Price$947.85 - $1429.46
2009 Saab 9-3L4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$784.81Shop/Dealer Price$946.51 - $1427.13
2000 Saab 9-3L4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$991.41Shop/Dealer Price$1204.64 - $1840.11
2007 Saab 9-3V6-2.8L TurboService typeBrake Master Cylinder ReplacementEstimate$533.91Shop/Dealer Price$622.35 - $882.25
Show example Saab 9-3 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saab mechanics

Real customer reviews from Saab owners like you.

Excellent Rating

(240)

Rating Summary
225
4
3
2
6
225
4
3
2
6

Charles

35 years of experience
342 reviews
Charles
35 years of experience
Saab 9-3 L4-2.0L Turbo - AC Compressor - Buda, Texas
Great experience, Charles came and completed the repairs as requested. Only down side was original quote was $60 less than end price. I still feel the service was worth the final price though. Will surely use the service and Charles again

Charles

35 years of experience
342 reviews
Charles
35 years of experience
Saab 9-3 V6-2.8L Turbo - Coolant Reservoir - Cedar Park, Texas
Another great experience with Charles Ocran! He diagnosed and replaced my coolant reservoir tank that was leaking. If I am putting a team together, I would want Charles on my team. Great work Charles!

Hakim

18 years of experience
10 reviews
Hakim
18 years of experience
Saab 9-3 V6-2.8L Turbo - Replace hood release cable - Westfield, New Jersey
Hakim is a very pleasant professional. He showed up on time, calling earlier to say he was on the way. He examined to car (disabled hood release cable) and went right to work. He was able to diagnose that the cable was operable but detached, thereby saving me the expense on parts. After all the repairs were completed, my bill was much lower than estimated. The auto dealer who had originally examined the problem said it would be 5x what MyMechanic charged. This was a great value.

Michael

24 years of experience
53 reviews
Michael
24 years of experience
Saab 9-3 L4-2.0L Turbo - Serpentine/Drive Belt Replacement - Franklin, Michigan
Mike showed up right on time and was very professional. Replaced serpentine belt and spark plugs on my Saab very quickly, plus performed a vehicle inspection indicating what may be needed in the near future. Highly recommendable and very reasonable charges.

Excellent Rating

(240)

Rating Summary
225
4
3
2
6
225
4
3
2
6
Number of Saab 9-3 services completed
2640+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saab MECHANICS
200+
experts on our platform

Recent articles & questions

How to Replace an Intake Manifold Runner Control
The intake manifold runner control fails when there is reduced engine performance, the check engine light comes on, or the engine misfires.
Jiffy Lube Oil Changes - Everything to Know
Stay in the know about Jiffy Lube oil changes here. Find everything you need to make decisions about your vehicle's maintenance with YourMechanic.
How to Get Lincoln Dealership Certified
Lincoln dealerships offer automotive technician jobs to those who are Lincoln certified through UTI’s Ford Accelerated Credential Training program.

Clunking noise when put into gear, rough shifiting

Hey there. Thanks for writing in about your 1992 Mercedes-Benz 300D. This sounds like the differential bushings could be worn. I would also check for vacuum leaks. There is a component called a vacuum switchover valve that helps to control...

When power steering pump cap is removed should there be a slight presure release

You should have the power steering reservoir cap checked to make sure the vent on cap is not blocked. Also make sure the system is bled of excessive air in the system. Once these two things are checked then you...

2005 ford f250 6.0 automatic stuck in 3rd gear

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com