Ram ProMaster 1500 Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(26)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(26)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Ram ProMaster 1500 Throttle Body Replacement is $403 with $308 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Ram ProMaster 1500L4-3.0L Turbo DieselService typeThrottle Body ReplacementEstimate$968.47Shop/Dealer Price$1191.84 - $1839.45
2014 Ram ProMaster 1500L4-3.0L Turbo DieselService typeThrottle Body ReplacementEstimate$948.47Shop/Dealer Price$1171.86 - $1819.48
2016 Ram ProMaster 1500V6-3.6LService typeThrottle Body ReplacementEstimate$711.97Shop/Dealer Price$876.23 - $1346.48
2016 Ram ProMaster 1500L4-3.0L Turbo DieselService typeThrottle Body ReplacementEstimate$948.47Shop/Dealer Price$1171.84 - $1819.44
2015 Ram ProMaster 1500V6-3.6LService typeThrottle Body ReplacementEstimate$711.97Shop/Dealer Price$876.25 - $1346.51
2017 Ram ProMaster 1500V6-3.6LService typeThrottle Body ReplacementEstimate$711.97Shop/Dealer Price$876.23 - $1346.48
2014 Ram ProMaster 1500V6-3.6LService typeThrottle Body ReplacementEstimate$732.89Shop/Dealer Price$901.00 - $1383.08
2017 Ram ProMaster 1500L4-3.0L Turbo DieselService typeThrottle Body ReplacementEstimate$953.47Shop/Dealer Price$1177.09 - $1824.90
Show example Ram ProMaster 1500 Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(26)

Rating Summary
24
0
0
1
1
24
0
0
1
1

Brian

23 years of experience
658 reviews
Brian
23 years of experience
Ram ProMaster 1500 V6-3.6L - Ignition Coil Replacement - Neptune Beach, Florida
Amazing! Never ever will I ever.... Go back to a Dealership for service. I feel blessed to have found this service. TRIPLE @ the dealership. Thank you Brian! Great customer service.

Dawit

15 years of experience
29 reviews
Dawit
15 years of experience
Ram ProMaster 1500 V6-3.6L - Parking brake won't release Inspection - Washington, District of Columbia
Dawit was terrific. Very knowledgeable, eager to find the problem (which he did) and a friendly fella as well. You all have a winner here...

Robert

18 years of experience
18 reviews
Robert
18 years of experience
Ram ProMaster 1500 V6-3.6L - Brake Rotor/Disc Replacement (Rear) - Atlanta, Georgia
Fast and helpful!

Gregory

31 years of experience
382 reviews
Gregory
31 years of experience
Ram ProMaster 1500 V6-3.6L - Car is not starting - Golden, Colorado
Gregory was great. He talked through the diagnostic process to me as he was going through the steps for our non-start issue. He made recommendations for things to pay attention to during the 50 point inspection. He was quick yet thorough and explained everything clearly.

Excellent Rating

(26)

Rating Summary
24
0
0
1
1
24
0
0
1
1
Number of Ram ProMaster 1500 services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

What Causes a Car to Stall?
You trust your car. You may not think about it, but you believe that certain functions will occur without fail. You may be aware...
Child Seat Safety Laws in New Mexico
In In New Mexico, there are laws governing child seat restraints, and requiring that every occupant of a vehicle must be properly restrained. This means adults and children alike. The laws in New Mexico are not all that strict when...
B1921 OBD-II Trouble Code: Air Bag Diagnostic Monitor Ground Circuit Open
B1921 means there is an issue with the airbag system diagnostic module, likely because of faulty electrical components.

Cylinder 6 misfiring

Since you have already replaced the plugs and wires, that narrows down what the problem could be. The most likely culprits of your issue are a faulty fuel injector or ignition coil. However, there is a slight chance that there...

Transmission making grinding noise when downshifting

If your vehicle is a standard, you can have a bad synchronizer in your transmission. The synchronizers are typically made of brass and are what make shifting from one gear to the other smooth. When they wear they make shifting...

My audi smells like gasoline I read it could be a clogged fuel filter my mechanic wants to replace a plug on my fuel pump

What your mechanic says sounds more likely. There is no gasoline flowing to the turbocharger, so a flange or gasket leak is unlikely to be the cause. A leaking turbo flange would give you an exhaust leak and any odor...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com