Ram ProMaster 1500 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(26)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(26)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Ram ProMaster 1500 Control Arm Assembly Replacement is $310 with $215 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Ram ProMaster 1500V6-3.6LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1025.13Shop/Dealer Price$1262.67 - $1952.77
2017 Ram ProMaster 1500V6-3.6LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$1005.13Shop/Dealer Price$1242.68 - $1932.80
2014 Ram ProMaster 1500L4-3.0L Turbo DieselService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$1128.62Shop/Dealer Price$1379.19 - $2079.08
2014 Ram ProMaster 1500V6-3.6LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1005.13Shop/Dealer Price$1242.66 - $1932.76
2015 Ram ProMaster 1500L4-3.0L Turbo DieselService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$525.85Shop/Dealer Price$643.60 - $974.27
2014 Ram ProMaster 1500L4-3.0L Turbo DieselService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1005.13Shop/Dealer Price$1242.68 - $1932.80
2016 Ram ProMaster 1500V6-3.6LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1010.13Shop/Dealer Price$1247.55 - $1937.56
2018 Ram ProMaster 1500V6-3.6LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1030.13Shop/Dealer Price$1269.97 - $1961.80
Show example Ram ProMaster 1500 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(26)

Rating Summary
24
0
0
1
1
24
0
0
1
1

Wayne

10 years of experience
7 reviews
Wayne
10 years of experience
Ram ProMaster 1500 V6-3.6L - Pre-purchase Car Inspection - Morrow, Georgia
Wayne was helpful and I appreciate his honesty. Plus he was exactly on time! Very nice guy. Would book again.

Robert

31 years of experience
641 reviews
Robert
31 years of experience
Ram ProMaster 1500 V6-3.6L - Oil Change - Los Gatos, California
Robert's the man. I trust him with my fleet of 5 vehicles. He gives you an honest job and walks you through your options. He's a skilled, honest professional who will look out for your best interests. So glad I found Robert at Yourmechanic.com

Stephen

32 years of experience
178 reviews
Stephen
32 years of experience
Ram ProMaster 1500 V6-3.6L - Oil Change - Boulder, Colorado
Stephen is so friendly and helpful. Goes above and beyond. Thank you!

Noel

14 years of experience
42 reviews
Noel
14 years of experience
Ram ProMaster 1500 V6-3.6L - Strut Assembly Replacement (Front) - Lansing, Illinois
I was very impressed with noel. He was on time and was very professional. I will definitely use yourmechanic again. Thanks.

Excellent Rating

(26)

Rating Summary
24
0
0
1
1
24
0
0
1
1
Number of Ram ProMaster 1500 services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

What Are the Different Types of Windshield Wipers?
When When you need to clean your windshield, you spray washer fluid onto the glass and turn on your windshield wipers. They swipe back and forth to remove any visual obstructions that may have collected on the glass. There are...
Symptoms of a Bad or Failing Distributor O Ring
If your car has a distributor, common signs the o-ring must be replaced include oil leaks and engine performance issues.
Is Rustproofing Your Car a Good Idea?
Rustproofing Rustproofing and undercoating your vehicle can protect it from corrosion and rust (https://www.yourmechanic.com/article/how-to-repair-a-rust-hole-in-your-car). This is especially important for the undercarriage of your vehicle, which commonly comes into contact with substances such as water, chemicals such as salt, and other...

What does the tachometer tell you?

The gauges in the center of your dash provide you with some pretty important information. The tachometer is designed to show you how fast your engine is turning, which is measured in revolutions per minute, or RPM. Note that this...

Engine does not start after fueling

Hi There, It sounds like your car's evaporative emissions system may have some problems. The EVAP system prevents fuel vapors from the fuel tank from escaping into the atmosphere as you are fueling your car and while the fuel just...

Accidentally touched the two battery terminal cables together.

Thirty years ago, you could have done that and gotten away with it. with a 2012 truck, there is likely some damage. The multiple computer systems on your truck are very sensitive to voltage surges like the one you just...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com