Pontiac Sunfire Grease on inner edge of tires Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(88)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(88)

Grease on inner edge of tires Inspection Service

How much does a Grease on inner edge of tires Inspection cost?

On average, the cost for a Pontiac Sunfire Grease on inner edge of tires Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Pontiac SunfireL4-2.2LService typeGrease on inner edge of tires InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2002 Pontiac SunfireL4-2.4LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 Pontiac SunfireL4-2.2LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2001 Pontiac SunfireL4-2.2LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2005 Pontiac SunfireL4-2.2LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1996 Pontiac SunfireL4-2.4LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1998 Pontiac SunfireL4-2.2LService typeGrease on inner edge of tires InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2000 Pontiac SunfireL4-2.4LService typeGrease on inner edge of tires InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Pontiac Sunfire Grease on inner edge of tires Inspection prices

Grease is an important protectant for many parts of your car. While it isn’t used in your engine, it is used in several other areas, including the CV joints on your axles, as well as the grease fittings on your suspension (many newer cars have sealed fittings that aren’t serviceable today). It’s also used in rear-wheel drive applications – a truck’s driveshaft may have one or even two grease fittings. However, if you’re noticing grease on the inner edge of your tires, it means that something has potentially gone wrong.

How this system works:

There are a couple of places that grease on the inner edge of your tires might have come from. The most likely is from the CV joint. CV axles, or constant velocity axles, are used in front-wheel drive cars to connect the wheel hubs to the transmission. They have two joints, one close to either end. The joints are made to be flexible, so that your car can travel over bumps and dips easily without losing traction.

The joints are flexible, and include moving parts. To protect them from damage from dust, debris and other threats, they’re covered by rubber “boots” filled with grease. This ensures that they’re constantly lubricated, and that dust and debris cannot enter and damage the joints.

However, over time, your boots wear. The rubber can become brittle from age, and can crack. Boots can also be torn through impact with debris in the road and more. When this happens, the grease can leak out, and dirt and debris can enter the joint.

Common reasons for this to happen:

  • Blown CV Boot: If you’ve noticed grease on the inner edge of your tires, there’s a chance that one of your CV boots has blown and is leaking grease out. This is a serious situation. Without grease, the joint is not properly lubricated. Even more worrying, dirt and debris can enter the CV joint and cause serious damage, requiring the entire joint to be replaced. If the situation is caught early, it’s possible that only the boot will need to be replaced.

  • Damaged Grease Fitting: Some vehicles have grease fittings on their suspension system that enable moving parts to move more easily with lubrication. If one of these is damaged, it’s possible that some of the grease may leak onto the edge of your wheel from a nearby grease fitting.

  • Recent Lubrication of Grease Fittings: Once upon a time, an “oil and lube” service really lived up to its name, with all of a car’s grease fittings being lubricated during normal maintenance. With most newer cars now having sealed systems, this has become less common. However, if your car has serviceable fittings, it’s possible that grease from a recent service somehow ended up on the inner edge of the tire.

  • Recent CV Boot or Axle Replacement: If you’ve already had a CV boot blow out and the axle has been rebooted, or a new CV axle has been installed, it’s possible that the mechanic did not clean off the inner edge of the tire after the repair.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the CV axles, boots, grease fittings and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your CV axles and boots, as well as any grease fittings on your front suspension in order to determine the source of the grease on the inner edge of your tires. The mechanic may also need to test drive the vehicle to test for symptoms of a failed CV joint, which include clicking during turning, or a vibration while driving.

How important is this service?

If the problem is with your CV boots, having the situation corrected is critical. While it’s possible to reboot a CV axle before the boot blows entirely, or immediately afterward, any use of the vehicle with the boot blown can contaminate the CV joint with dust and dirt. This will eat into the joint itself, causing irreparable damage and requiring the entire axle to be replaced. If you’ve noticed grease on the inner edge of your tires, one of our professional mechanics can diagnose and repair the condition.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(88)

Rating Summary
79
6
0
1
2
79
6
0
1
2

Robert

20 years of experience
1098 reviews
Robert
20 years of experience
Pontiac Sunfire L4-2.2L - Car is overheating - Denver, Colorado
Robert is very helpful and straight to the point.

Jose

17 years of experience
433 reviews
Jose
17 years of experience
Pontiac Sunfire L4-2.2L - Car is not starting - Beaverton, Oregon
Good mechanic explained everything in detail

Augustine

12 years of experience
129 reviews
Augustine
12 years of experience
Pontiac Sunfire L4-2.2L - Coolant Temperature Switch (Sensor) - Albuquerque, New Mexico
Augustine is very personal. My appointment was at 1pm but he didn't mind coming early. I will definitely be using this your mechanic.com and ask for him.

Alejandro

11 years of experience
48 reviews
Alejandro
11 years of experience
Pontiac Sunfire L4-2.2L - Starter - Alhambra, California

Excellent Rating

(88)

Rating Summary
79
6
0
1
2
79
6
0
1
2
Number of Pontiac Sunfire services completed
968+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Brake Caliper
Common signs include brake fluid leaks, abnormal sounds, and vehicle pulling to the left or right.
Symptoms of a Bad or Failing Oil Return Hose
Common signs include cracks or bulges on the hose and noticeable oil leaks.
How to Install a TV Tuner in Your Car
Install a TV tuner to the monitor in your car so passengers can watch TV on the road.

the car is stuck in first gear and wont shift

A certified mechanic from YourMechanic could perform a mobile no shift diagnostic (https://www.yourmechanic.com/services/not-able-to-change-gears-inspection) right at your location in order to identify the cause. If, as you mention, the shift linkage feels loose there is a possibility of an easy to...

My 2007 Dodge Caliber ACT won't shift out of lower gear, the temperature light and check engine light came on with a code of P0172

Hi There, This code relates to a rich fuel condition. This can be caused by a faulty mass air flow sensor, a bad fuel injector or a faulty coolant temperature sensor. In your case since the temperature light came on,...

2005 jeep wrangler won't start. stops cranking mid start

You may have a defective starter but will need to monitor the start signal on starter to see if it stays on while the start signal is on. If losing start signal to starter then you may have a bad...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com