Pontiac LeMans Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Pontiac LeMans Brake Master Cylinder Replacement is $286 with $132 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Pontiac LeMansL4-1.6LService typeBrake Master Cylinder ReplacementEstimate$537.62Shop/Dealer Price$633.36 - $911.67
1992 Pontiac LeMansL4-1.6LService typeBrake Master Cylinder ReplacementEstimate$527.71Shop/Dealer Price$621.51 - $898.36
1990 Pontiac LeMansL4-2.0LService typeBrake Master Cylinder ReplacementEstimate$527.71Shop/Dealer Price$621.53 - $898.41
1991 Pontiac LeMansL4-1.6LService typeBrake Master Cylinder ReplacementEstimate$527.71Shop/Dealer Price$621.53 - $898.40
1990 Pontiac LeMansL4-1.6LService typeBrake Master Cylinder ReplacementEstimate$527.71Shop/Dealer Price$623.15 - $901.24
Show example Pontiac LeMans Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(8)

Rating Summary
7
0
0
0
1
7
0
0
0
1

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
Pontiac LeMans V8-5.3L - clean out fuel pump and install filter. run new fuel line. clean out feed line - Anthem, Arizona
I selected Peter as my mechanic because of his vast knowledge (and very high rating) of classic cars. I own a 1966 Pontiac that needed some issues sorted out, Peter diagnosed and made the repairs to get me on the road again. Peter was very friendly and answered all my questions in a thorough manner. I would not hesitate to call Peter again, for any type of vehicle.

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
Pontiac LeMans V8-5.3L - Distributor - Anthem, Arizona
Always excellent service from Pete.

Isai

28 years of experience
230 reviews
Isai
28 years of experience
Pontiac LeMans V8-5.7L - Inspection / Diagnostics - San Antonio, Texas

Corey

28 years of experience
43 reviews
Corey
28 years of experience
Pontiac G5 L4-2.2L - Brake Master Cylinder - Atlanta, Georgia
Fast professional job. Very knowledgeable and nice guy

Excellent Rating

(8)

Rating Summary
7
0
0
0
1
7
0
0
0
1
Number of Pontiac Brake Master Cylinder Replacement services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

How Long Does a Headlamp Dimmer Switch Last?
Most Most drivers neglect to realize just how many systems have to work together to make driving at night possible. Among the most important things that you will have to possess when trying to drive at night is a set...
How to Tighten Lug Nuts
Lug nuts, or wheel locks, hold the wheel onto the car. Missing lug nuts can cause the car to wobble so it's important to keep lug nuts tight.
The Guide to Colored Curb Zones in Montana
Montana Montana drivers are well aware of the laws and regulations that apply to them when they are out on the roads and driving. They know they need to obey the speed limits and use their signals when turning and...

Car not starting after accident

Hi there. When you are in an accident in this vehicle the inertia fuel shut off switch will trip and shut the fuel system down. That is in the trunk and will typically need to be reset or replaced. If...

Speedometer not working correctly

Your assumption sounds about right, either the sensor and or the cable are sending some mixed signals to the dash and it doesn't know what to do with it. Have a certified mechanic take a look at your speedometer components...

My esp bas light and Abs light came on while driving my 2010 Dodge Charger and it seems as if it’s trying to stop on its own. What needs to be fixed?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com